3d print monitor shelf

Print Settings Printer: Original Prusa i3 MK2 Rafts: No Supports: No Resolution: 0.2mm Infill: 13% Notes: If you want the shelf to look exactly like the original set your slicer (I used Slic3r) as such: Fill density: 13% (you'll have to type it in)...

Print Settings Printer: Original Prusa i3 MK2 Rafts: No Supports: No Resolution: 0.2mm Infill: 13% Notes: If you want the shelf to look exactly like the original set your slicer (I used Slic3r) as such: Fill density: 13% (you'll have to type it in)...

Those hexagons in the picture were extruded as single (long) lines with very few retractions. Print instructionsResolution: 0.2mm Infill: 13% Notes: If you want the shelf to look exactly like the original set your slicer (I used Slic3r) as such: ...

... legs and nuts or make them solid. I glued my legs in place once I got the angle I wanted. Plus, the Velcro and it's awesome.**** Props to the original designer. It's a really cool monitor shelf. I love the hexagonal fill. ...It looks fantastic!

... a thicker base to stop it flexing so much. ... Remixed from Easy Print Monitor Shelf https://www.thingiverse.com/thing:2179033, which is a remix of http://www.thingiverse.com/thing:1114319. ... Thanks go to riskable for making a quick printing shelf.

Monitor shelf modeled for Dell monitor.

Small shelf for PC monitor

Shelf to mount on top a monitor. Made to fix on approximately 16mm thick monitor with 12mm bezel. ... Recommend flipping the model upside down to print.

a shelf to put stuff on that sits on top of your monitor (note: I made this to fit my monitor it may not fit every monitor)

A 10x1x10 cm shelf to sit on top of your monitor, printed in one piece but the screw. The screw is for fixing the bar at the preferred adjustment. Printed with 30% infill. ... Enjoy :)

I printed 2 of these. ...I used one for each end of my computer monitor for a sound bar. Shelf is 4 inches wide and 4-3/8 deep. ...The gap is 3/8 wide for the top of the monitor.

... ...Printed on Printrbot Play with extended Y axis and heated bed. Print Settings Rafts: No Supports: Doesn't Matter Resolution: .3 Infill: 100 Notes: Printed main part at .3mm to save time, legs and nuts printed at .15mm PRINT LEGS AT 100% INFILL

This is a shelf / mount for a samsung FS350 monitor. It hooks over the screen and you can attach whatever is required to the other end. Microphone, webcam, etc. ... Remix of Carienne's soundbar holder

i don't use support :) middle shelf custom your self!

... tapered to fit back into the corner of the desk. I can push the keyboard, mouse, and 3D mouse under the shelf to give me more desk space. ... After seeing mine everyone wanted one so I gave my company the design and I think about 10 more were made.

&nbsp;And this print tries to solve this problem a bit. ...Yeah you cannot store there everything but I feel that for something like a remote control or clock it is ideal choice.</p><p>Pro tip: The angles are different for the left and right side.</p>

I use these easy to print supports for my monitors. ...I mounted four supports with plywood screws underneath a wooden shelf.

Monitor speaker shelf for small speakers. ...No tools required just place shelf on to monitor and speaker on shelf and your good to go.

Remox of @vornox Monitor shelf with some peg files added to the projet. ...Nothing really complicated.

Shelf legs for a monitor stand I built. ...Designed to be attached to a 12in deep shelf plank that can be easily found at your local hardware store.

Quad Monitor Stand has a Post that is perfect for placing a shelf on top of for a Sonos.

Foot for a monitor stand made out of an Ikea shelf.Made to fit 1" No. ...10 Flat Head ScrewsDimensions: 6cm x 5cm x 5cmFull details here: https://www.iansmith.is/blog/ikea-shelf-monitor-stand

This is a remixed version of "Monitor shelf" by Vornox. I kept running into issues with the grid on his original design when printing and decided to do a quick fix for myself. Really love the idea. ... Edit: Yo so i made this flat not thinking...

I needed a monitor shelf that would fit on my printer so I shortened this by about 8 cm. This is a remix of a remix of a remix. ... Print the legs and nuts with either lots of infill or 100%

This is a VESA mount for attaching a monitor to a 3/4" (~19mm) shelf. It has two height options depending on which way is up. It attaches to the shelf with 8 1-1/4" screws. ... If the back of the monitor is curved, it can help to add some washers...

A small 5” wide 3” deep shelf for monitor. The front edge lip is designed with small bezel monitors in mind. ...Mine had 4mm space above viewing area so that’s the lip depth.

Simple shelf to hold the monitor component of a Eufy baby monitor out of baby's reach while it's charging. ...Holes at the back fit standard #8 screws.

Shelf legs for a monitor stand I built. ...Designed to be attached to a 12in deep shelf plank that can be easily found at your local hardware store.

To stand a shelf on for monitors, to bring them to eye height over a desk. Each leg takes a 3.5 x 16mm countersunk screw to secure it to the underneath of the shelf. When printed in PLA according to the instructions, each leg can take the weight of...

NOTE: this is still a work in progress, it works and is functional but i am still working out kinks to reinforce, and to give it less free movement it is made to fit above 22" and smaller monitors, i will be redesigning slightly to make it...