anet a8 laser conversion 3d models

The filament holder for anet A8 is a simple installation that holds filaments above the printer. It can be paired with the pass filament multiple as shown in the photos. ... To use, print this part on your mirror bed and trim it to fit on the left side...

... cables to the box, this project is not finished yet, I hope to do so soon. A greeting from a fellow enthusiast. Print Settings: Printer: Anet A8 Rafts: Doesn't Matter Supports: Yes Infill: 20 Overview and Background Lesson Plan and Activity Anet A8

I searched a top holder for my Anet A8, because I use my old computer desk and the Anet A8 fits perfectly, but not the original spool holder. I was inpired by this https://www.thingiverse.com/thing:1832235 MK2 spool holder, that not fits on my Anet...

... Printer Settings: - Printer: Anet A8 - Rafts: No - Supports: No - Resolution: 0.2mm - Infill: 30%+ Post-printing, if you experience elephant foot issues, use a x-acto knife to remove the foot from the inner lower part where it snaps into the frame.

It's also compatible with "Anet A8 Brackets to Reduce X-Axis Motion" by Leo_N: http://www.thingiverse.com/thing:1872162, but it's not required. There are two versions of the holder available - a plain one and a chamfered one. I think the chamfered...

This spool holder is also compatible with Leo_N's "Anet A8 Brackets to Reduce X-Axis Motion" design on Thingiverse (http://www.thingiverse.com/thing:1872162), although it is not required. There are two versions of the holder available, a plain one...

I removed content from a database. For further information, please refer to the original source. ...https://www.thingiverse.com/thing:2234290

... bottom portion, allowing the wingnut to make contact with the heated bed. This change renders M3 nuts unusable. To get it working again, you can use either stock bolts from the Anet A8 or opt for M3 bolts paired with the Anet A8's wingnuts (M3).

I liked the Anet A8 Heatbed Camera Mount Logitech C920 by Catchy with the A8+ it was not long enough with a 300 x 300 bed. I extended it to make it work, This is my VERY First RE-Mix. ...

I made a fan cover for the Anet A8 with the logo of the best car manufacturer in the world. ...So who wants to make his A8 an Ossi needs this fan cover.

I designed a mosfet box for Anet A8 and Anet A6, I left some spaces in it in case they might be needed in the future, I hope you like it.

This is a precision-engineered SN04 sensor mount specifically designed to seamlessly integrate with the original ANET A8 extruder, ensuring optimal performance and compatibility.

Tender for Belt X on Anet A8 (compatible with other RepRap like Prusa i3) Change Log: v1 Removed v2 Improved axis alignment v3 Enhanced belt tender maintenance

Anet-A8-Power-Cover.STL = Just a safety cover, without Switch shape Anet-A8-Power-Switch-Cover.STL = Safety cover with switch + fusible shape sized 58mm x 34mm Anet-A8-Power-Switch-Cover.STL = Safety cover with switch shape sized 28mm x 22mm Ask me...

The Anet A8's design features a special mounting plate for two MOSFETs that control both the extruder and hotbed of your 3D printer.

Support for Hotend Key and Printer Screws Print Settings Printer: Anet A8 Raft Settings Raft Support: No Support Material Supports: No Infill Density Infill: 20%

I designed this to support the cable of the Anycubic Ultrabase heatbed fitted on my Anet A8. Printed in PLA, 0.2mm, support with the bed only. ...Enjoy !

Print Settings Printer: Anet A8 Raft Options: Disabled Support Material: Disabled Resolution: Set to 0.2 mm Infill Percentage: Set to 25%

Anet A8 PSU Cover Modified Modified from: https://www.thingiverse.com/thing:2867007 Key Changes: - Internal Protections Eliminated; - Additional Wire Cutouts Added.

This is a bracket i designed to keep the gantry more stable on my Anet A8 for the other side just mirror the bracket in the slicing program.

I design an improved version of the Anet A8 carriage from scratch, taking inspiration from my original creation as a reference point.

Stand for switch, I use to power on/off LED lights. ... Print Settings Printer: Anet A8 Raft settings: Enabled Support settings: Disabled Infill percentage: 30%

I designed this custom firmware specifically for my hypercube and it's compatible with the Anet A8 motherboard. ...I'm hoping you'll find it useful!

This is a precision-engineered belt tensioner tailored specifically for the Anet A8 Y belt, engineered to seamlessly integrate with a toothed idler for optimal performance and reliability.

I designed this to support the cable of the Anycubic Ultrabase heatbed fitted on my Anet A8. Printed in PLA, 0.2mm, support with the bed only. ... Enjoy !

Printer drivers for three-dimensional printing machines like the Anet A8 are typically stored on a computer's cache memory to improve print speed and quality.

This custom belt holder replaces the standard acrylic components found in the Anet A8's stock setup, specifically designed to support the Y belt.

Fit perfect for Anet A8 Plus. i glue the bearing. ...I think its safer :) This is a Remix of https://www.thingiverse.com/thing:2537713

Filament holder for the Anet A8 3D printer is easy to attach, simply pull it into place as illustrated in the image.

This is an improvement to our existing guide rod fixation system for the ANET A8 3D printer. ...It's better designed and more efficient.