anet a8 laser conversion 3d models

**Models Included:** ANET_A8_Switch_Mount_V1 - Original Mount ANET_A8_Switch_Mount_LED_V1 - Original mount with "LED" ANET_A8_Switch_Triple_Mount_V1 - Triple Switch Mount Edit the model to add your own label or print a label and stick it on. Feel...

Improved http://www.thingiverse.com/thing:1547256, more robust and easier to print with a secure top closure that prevents fallen filament or airway obstruction issues. ... Print Settings Printer: Anet A8 Resolution: 0.1 mm Infill: 15% dense

I designed another fanduct for the Anet A8, utilizing it as the foundation for my custom cabinet edition printer setup. ...Additionally, I incorporated a holder for a M12mm PNP inductive sensor to enable the automatic leveling feature.

This is my custom LV cover fan for my Anet A8. -------------------------------------------------------------------------------------------------------- The screws should fit perfectly in this version; the previous one was too small.

I craft bespoke reverse extruders specifically tailored for the Anet A8. ...To convert this customized setup into a standard configuration, you can utilize Cura's mirror feature with precision.

The belt should just fit in and hold itself when tensioned. ...This mount also perfectly aligns and centers the belt on an Anet A8. ...You will probably have to shorten your belt a bit.

This is a stabilization system for the Anet A8's vertical axis. ...You require two high-quality bearings, specifically model number 608, one designed to support the left Z-axis motor and another to stabilize the right Z-axis motor.

**Other improvements for Anet A8:** * Overhead lighting - https://www.thingiverse.com/thing:4901565 * Side lighting - https://www.thingiverse.com/thing:5158112 * Power supply cover - https://www.thingiverse.com/thing:4901390...

Same Anet A8 X-Axis Belt Tensioner by WedgeSD desing (https://www.thingiverse.com/thing:1895051) with 3mm holes. Tendeur de courroie pour l'axe X. ...Revue avec un tarreau pour vis de 8

... it fits snugly into this Fan Holder: http://www.thingiverse.com/thing:2151906. If you're ready to print, here are my recommended settings: Printer: Anet A8 Rafts: None Needed Supports: Not Required Resolution: 0.2mm Precision Infill: 30% Density

... to adjust the bottom of the mount by pushing it up or down a few millimeters to match your printer's exact specifications. Print Settings: Printer: Anet A8 Rafts: Not required Supports: Yes, enabled Resolution: 0.2 mm precision Infill: 15% density

I'm excited to share this fan shroud design with you all, which replaces the traditional metal guard on the extruder fan of my Anet A8 printer. While it's specifically designed for the Anet A8, I believe it may also work well with other printers as...

... (not an affiliate link) I have remixed the TL Smoother Holder for Anet A8 by keithluneau, thanks. ORIGINAL POST DATE 19-FEB-2019 Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0.3 Infill: 10% Category: 3D Printer Parts

... enough to hold the ATX PSU even when printing at 20% infill settings. Designed in Tinkercad with efficiency in mind, this holder prioritizes filament economy. Print Settings: Printer: Anet A8 Rafts: No Supports: Yes Resolution: 0.3mm Infill: 20%

It's only one part, with "Anet" on one side and "A8" on the other, allowing you to print the same piece twice. Print time: 3 hours and 37 minutes at 0.35mm layer height. ... Printer Settings: Printer Brand: Prusa Printer Model: Prusa Mk2 Rafts: Yes...

... prints! Not tested yet but tests are coming very soon! Thanks! Hello friends, I've created a dust filter for our beautiful Anet A8 printers. It's still a work in progress, so not quite functional at 100%. ...I hope it makes your prints cleaner!:).

... high-quality materials such as aluminum or steel for the frame's construction. By doing so, you can increase the overall durability of your Anet A8 setup and enjoy prolonged usage without worrying about structural issues arising from wear and tear.

To address this need, a versatile adapter has been designed for the Anet A8, ensuring that filament rolls are securely stored and easily accessible during long print jobs. ...This innovative accessory simplifies material management and eliminates the...

... a snug fit that prevents it from coming off or moving. Printer Settings: Printer: Anet A8 Rafts: No Supports: Yes Resolution: 0.1 or 0.2 Infill: 20 Notes: I printed this model with concentric support in the center, but you may not need to do so.

This is a mount for the Anet A8 3D Printer's LED strip, designed to replace the bottom two support posts behind the LCD screen. It can be used with an LED daytime running light for cars or simple LED tape from eBay. ...To print this item, use your Anet...

... image. The holder seamlessly integrates with your Anet A8 using the factory-installed screws and pre-drilled holes. ... If needed, feel free to fine-tune the thickness of the walls, base, or support structure to achieve a more robust build.

I designed these dust caps for my Anet A8 as a last resort since I couldn't locate any comparable alternatives anywhere else. They fit snugly over the hole and closely hug the screw, preventing this one from shifting even slightly. After printing a...

... include 4-6 M3 screws and 2 M3 nuts. Measurements of the Mosfet drills are 80mm x 59 mm. The distance between the frame's holes is 85 mm. Print Settings: Printer Brand: RepRap Printer: Anet A8 Rafts: No Supports: No Resolution: Doesn't matter

This innovative attachment securely fastens to the frame using an extra nut and bolt from the original Anet A8 kit. The MOSFETS are firmly secured to the holder via 8 tiny self-tapping screws. MOSFET mounting holes are positioned 35mm apart, with a...

Printer: Anet A8 Material: PLA Extruder Temp: 205°C Bed Temp: 60°C Resolution: 0.2 mm Infill: 25% Rafts: No Supports: No You will need four M4 countersunk cap screws to assemble these parts. ...We utilized Liquid Tape to insulate the solder connections...

I took inspiration from this MK2 spool holder https://www.thingiverse.com/thing:1832235 that actually works great, but unfortunately not compatible with my Anet A8 printer. ...I designed a new holder using OpenSCAD and surprisingly it functions without...

... components. I used it to install an LED strip, which you can purchase at electronic markets, as shown in the attached photo. This design was modified from https://www.thingiverse.com/thing:2412608 (credit to the original creator) to fit the Anet A8.

... By strategically positioning the fans near critical components, such as the motherboard and power supply, the Anet A8 mainboard fan mount effectively regulates temperature fluctuations, promoting a stable printing environment and reliable results.

... connector. Print it just like you see it in the STL file, without any supports needed. If you're looking for more great parts, check out my collection on Thingiverse: https://www.thingiverse.com/aRGiRob/collections/my-anet-a8 or visit my profile.

... Anet A8 versions. Also, it is the closest to the extruder hole I've ever printed. The second file is the same thing but without the loophole. For other parts, please visit my collection: https://www.thingiverse.com/aRGiRob/collections/my-anet-a8