anet et4x 3d models

The small version is printed with "smokey transparent PET-G," featuring a 0.2mm resolution and a 0.4mm nozzle in spiral vase mode on an Anet A6 with a flow-rate of 80%. The larger version is made from "green transparent PET-G" at a 0.35mm...

... will regularly update this file with any new upgrades or improvements I make. Request from Anet 8 Facebook group: Item bars lengths: 2 pieces at 415 x 40 x 40 mm 2 pieces at 290 x 40 x 40 mm 2 pieces at 420 x 40 x 40 mm 1 piece at 370 x 40 x 40 mm

Others reported similar problems.Changes made:Extended gap to 42mmShrunk clip height to 6.5mm Print Settings Printer Brand: AnetPrinter: A6Rafts: NoSupports: YesResolution: 0.2mmInfill: 15%Filament: Tinmory PLA Silk Silver Notes:Prints...

Perfect match with Screw and Nut : http://www.thingiverse.com/thing:2010291 The screwdrivers are a must-have tool set : http://www.thingiverse.com/thing:2010253 A versatile hammer is essential for any project :...

Remix of “Fully customize-able microscope slide holder” created by lwilder.Customized for standard 25.4x76.2mm, 1-1.2mm thick slides.The OpenSCAD file can easily be customized (for instance, change the value of the “slides” variables to set the...

It works for all the square-sized Intel NUCs (~ 11x11 cm). The Fusion 360 .f3d file is included if you need to make any adjustments. Print Settings Printer Brand: Anet Printer: A8Rafts: No Supports: NoResolution: 200 Infill: 38 Filament: Jupiter...

I was looking to remove the outer shell from some RG316 cable and had no good tool laying around... But I had a old pencil sharpener, a 3D-Printer and an idea, so this is what came out. I thought it was looking like a shark, so I added a shark fin :)...

... option produces very weak light. As "there's no written rule for tastes," I have included files for both options. **3D Printing Settings** * Printer Brand: Anet * Printer Model: A6 * Rafts: No * Supports: No * Filament Type: bq Easy Go PLA Black

... For more information, please visit this link (activation is in configuration_adv.h): http://marlinfw.org/docs/features/lin_advance.html To install MARLIN on the ANET, follow these simple instructions: https://www.thingiverse.com/thing:2426747

Same ones as used for hard drives should work. Print instructionsUnassociated tags: quanta caddy, server caddy Category: Computer Print Settings Printer: Anet A8 E3D v6 Rafts: No Supports: No Resolution: 0.2 or smaller Infill: 100% Notes: Fan on for...

... in the images. Print Settings Printer: Anet A8 Rafts: Doesn't Matter Supports: Yes Resolution: .2 Infill: 40% Notes: I use Cura as my slicer and have found that the Concentric supports work well with this sort of object. ... Category: Bathroom

I decided to design my own in Fusion360. This works best if printed on its side. Attach to the undersid of a desk or table using command strips or doublesided type. Print Settings Printer: Anet A8 Rafts: Doesn't Matter Resolution: .2 Infill: 15%...

I based this fan duct on the Anet A8 Fan semi circular fan duct from Lokster. To maximize cooling for my dual nozzle (Chimera Clone), I mirrored the duct. The fans are secured by printed parts themselves, requiring no additional screws if the...

And in all: 50mm Pentagon for quick print time for those who want to have one but don't want to invest much filament and print time... 70 minutes and like 12g of Filament. Print Settings Printer Brand: Anet Printer: A8Rafts: No Supports: ...

I modified this slightly to print on smaller printers like the Anet A6 and similar clones. I tweaked the middle section and bottom section a bit since I plan to use this with USB-driven LEDs. The middle section now has a hole for running the USB...

I used it form my Ironing board. Space between Wall and inner wall of hook is 35mm DE: Nur ein einfacher Haken für mein Bügelbrett. Print Settings Printer: Anet A8 Rafts: NoSupports: No Resolution: 0,22mmInfill: 20% Notes: EN:Use the small...

I designed this taking the models of the quick swap mounting system for the Anet A8 found here https://www.thingiverse.com/thing:2750693 and the i3 A8 Badass DiggityDank MK8 Carriage found here https://www.thingiverse.com/thing:2031671, merging both...

I printed it successfully with my (mostly stock) Anet A8 without any supports. It prints LIGHT, it prints FAST, it prints EASY. Dimensions: Wide: approximately 6 mm Height: approximately 15 mm Length: approximately 26 mm Weight: approximately 1...

I designed this because I don't trust the tiny MOSFETs on the RAMPs board any more than I trust the ones on the factory Anet board, but the MOSFET was hard to mount in any reliable or attractive way. This has a standoff of around 12mm to allow for...

I'm using an Anet A8 clone, which is a type of 3D printer. Now, when it comes to rafts, it doesn't matter what kind we use. The supports also don't have to be a specific type. As for the resolution, I've set it to 0.2 millimeters, and for infill,...

50mm Version des tollen Aero Lenkerhalters für Sigma ROX GPS 11.0 von CBiker (https://www.thingiverse.com/thing:2612827).Die Verbreiterung war Notwendig wegen Umstieg auf 48mm Lenkerhalter.Zusätzlich wurde die Lenker-Fixierung leicht optimiert für...

... to be safe. Works well for my Ender 3, Ender 5, CR-10, and Anet A8Want More Free Designs? ...Like and Comment! Instructions:Load in Cura Slicer and be sure to use these settings:Layer Height: 0.2Line Width: 0.4Infill: 100%Build Plate Adhesion: None

The midsection is 60mm long and designed specifically to remove a 45mm LM8LUU linear bearing from the 60mm X-Mount of an Anet A8. Kudos to ikarsian for coming up with this innovative concept! I'm utilizing the free version of DesignSpark...

Print Settings: Printer: Anet A8 Rafts: You can choose any setting, it won't affect the outcome. ... Supports: Yes Resolution: 0.1 mm Infill: 100% is recommended for maximum strength, but printing with 50% tetrahedral infill will also produce a...

Hello, this is a simple tip for those who are fed up with annoying sounds.\r\nThere are two versions, one normal and another with a small magnet of 5x1.5 inside to prevent it from getting lost and making it easier to attach.\r\nPrint it at low speed...

I designed this spool holder from scratch for my Anet A6 printer. It utilizes a 120mm long 8mm bolt and stand, mounting the arms above the machine using custom-designed mounts found on Thingiverse. However, the spools continued to drag on the...

Prints upside down. Thread something nicer than string for a hanger - a contrasting piece of ribbon would look good. Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: .2 Infill: 20% Post-Printing Some minor cleanup maybe needed...

This is my remix from Headphone Holder by sandbk V4. [https://www.thingiverse.com/thing:1698312] I've cut the bottom support and added a USB sized slot to accommodate my headphones USB dongle. It came out pretty clean and I like that it keeps the...

Ersatzring für eine "Käfer" Messuhr mit 54mm Gehäusedurchmesser. Replacement part for a "Käfer" precision dial indicator. Print Settings Rafts: Yes Supports: NoResolution: Fine Filament: Noname el cheapo PLA gold-ish Notes: To compensate for bad...

This part was specifically designed for use with the ANET A6/A8 filament holder but can also be utilized with other models. Project files for Creo Parametric are available for customization purposes. The diameter of the part is suitable for most...