ender 5 camera mount 3d models

Easy Camera mount for ender 5 with both their model combined made a rock solid mount

Simple camera mount for ender 5 Extra materials: 1 x countersunk screw M4x20 2 x countersunk screw M4x8 1 x M4 nut 2 x M4 T-nuts 1x camera screw 16mm (https://www.thingiverse.com/thing:2749041)

This is a camera mount for the ender 5 and the Logitech c922. But it can be used for every 20x20 printerframe and actually doesn't have to be at a corner. Other cameras with a similar base fit too! The camera base is 42 mm wide at the printer side...

I needed a mount for my wide-angle Raspberry Pi camera and I didn't like the others. This one is designed to use M2 screws to attach the camera and M3 screws and nuts to connect the parts. It can be mounted to the 2020 extrusion using M3 screws and...

This mount is perfect for a PS3 Eye camera on a Ender 5. ... Just print it without support.

This mount is perfect for a PS3 Eye camera on a Ender 5. ...Just print it without support.

I added a mounting hole for a camera screw to mount my c970. I used the screw from: https://www.thingiverse.com/thing:3024167 The screw hole was not perfect as I made it using windows 3d Builder. But it worked well for me. ... Printed on an...

I am using an ancient Microsoft Lifecam NX-6000 for OctoPrint but needed a way to properly mount it. ...I am using the Ender 5 tool holder and like how it snaps to the frame. ... So I took that tool holder and changed it so I could clip on the webcam

... You can create videos such as this https://youtu.be/0ztJAmmttwY . The source can be found here https://www.tinkercad.com/things/aM4jECzg4qI-ender-5-usb-camera-mount

Ender 5 RPi Camera Mount but i attatched two pieces together

A simple camera mount for the Ender 5 to mount a magnetic base Wyze camera. I'm sure other cameras and accessories could use this mount. It attaches with 2, 4mm bolts and t-nuts. It is designed on a 45 degree angle to the face of the printer so the...

Clips to the mounting plate on the Ender 5 at the front to give a good angle of the lower layers, and sits inside the frame so the view isn't obscured when the plate moves up and down. Sits far enough back that the stock fan enclosure won't hit it. ...

Slight modification of Shenkoe's design (https://www.thingiverse.com/thing:4729272): - I added cut-outs on the back of the camera case for 14x14mm heat sinks (the IR leds are running quite hot otherwise) - The original corner mount is colliding with...

I designed this arm to mount it to the frame of the Ender 5. To be honest the arm is universal and you can pretty much mount anything you like with it. I stuck the mounting plate to the case using silicone adhesive, but any kind of glue will do. ...

This is a camera mount for the Creality camera or any camera that uses a 1/4" bolt. You will need 2 m3x10 screw and 2 m3 t slot nuts. It has worked great on my print. Set the x axis to 100mm if it does not size correctly. ...and when printing have the...

To set up: * Print the three parts of this mount, and the Pi case from the related post * Screw the arm onto the bed using the existing hex screw * Fix the Pi camera which is inside the casing to the post using the pin * Insert the post into the arm...

The vertical version places the camera above the perimeter extrusion of the machine for more clearance and wider view. The alt version places the camera outside the perimeter of the machine for more clearance and an even wider view. ...This is the...

Remix of https://www.thingiverse.com/thing:3842649 Alternate mount for standard Raspberry Pi camera - specifically if you are using D_jerspersens front belt covers: https://www.thingiverse.com/thing:3412007 I removed the screw that holds the front...

Need a place to locate my camera.. ... This is a remix from https://www.thingiverse.com/thing:3465579 Printed up right with support as I wanted a particular finish., can be printed without.

I was looking for a camera mount that would rise and fall with the bed of my Ender 5 plus (I'm sure it will fit other models as well) and didn't find what I was looking for. then I was looking at my hot bed cable strain relief which rises and falls...

I needed a Wyze Cam mount for my Ender 5 but could only find the type I wanted on here, for an Ender 3. So I made some changes. I redesigned the slot tab to fit better and added a tension screw to keep it sturdy and in place. I removed one of the...

This is a remix of https://www.thingiverse.com/thing:3567015 This lowers the mount by 12mm to allow for a lower angle of the print surface. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: 0.2 Infill: 10%...

This is a remix from https://www.thingiverse.com/thing:4210431 I changed the mount to accommodate a Wyze v2 camera. This needs to be printed upside down with supports. ... In the pictures there are holes to secure it to the frame but they are...

Rescaled to make it a bit closer to the bed and also give a bit more room for the camera itself, although its still a snug tight fight.

This is a remix of https://www.thingiverse.com/thing:3567015 This lowers the mount by 12mm to allow for a lower angle of the print surface.

I remixed this part since I wanted a way to mount it on the back of the printer without using any extra hardware. The red parts are what I made changes to, everything else came from the original post here: https://www.thingiverse.com/thing:3747437 ...

This is a mounting system for a Pi camera on the Ender 5. These can be mounted in any of the corners or on the front or rear cross bar. The piece the camera fits into has an internal slot that the ribbon cable goes through, make sure you don't leave...

Just a mount to attach a Noir camera to my ender 5 plus. ...Printed laying flat with no supports.

Just a mount to attach a Noir camera to my ender 5 plus. ...Printed laying flat with no supports.