firefly pro 3d models

This is the all new Firefly Pro. Its a 250 size quad thats designed for the race track. It is still a work in progress but right now I am working out the last edges. A short guide with build instructions will be uploaded soon on...

Update 10/02/16: Finally finished and added the Firefly Pro Guide to the website. Sorry for the delay on this one. Happy flying! http://firefly1504.com/fireflyproguide.html Update 28/12/15: Added new arms with support for 22mm motors with M3 mounting...

Feet for the Firefly Pro quad. Using DYS BE1806 2300KV motors. ...How I Designed This created in tinkercad

Kabelschutz für Firefly Pro Print Settings Printer: CTC Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 10%

Extra light arm for FireFly Pro without ESC protection. ... Arm for 1806 2400KV BL motors with M2x4mm screws.

This is my remix of the larger arm adaptation for the Firefly Pro. I had to fix the original file. I also made an X frame version of the arm to allow airflow to the ESC housed within the arm. I had the best luck printing the ESC holder with...

Some parts and such I remixed for the firefly pro: Camera mount for the HS-1177 or similar camera: https://www.banggood.com/700TVL-2_8mm-Lens-100-Degree-Wide-Angle-FPV-Camera-NTSC-PAL-p-1044895.html?p=X709229380619201703O To get camera to fit I...

Bigger ESC housing for firefly pro drone. ...Some more ESCs fit now.

These are remixed ESC housings for the firefly pro drone to use ESCs with a capacitor. I have only modified them and not designed them. ...Find the original parts here:https://www.thingiverse.com/thing:1163884

These are remixed ESC housings for the firefly pro drone to use ESCs with a capacitor. I have only modified them and not designed them. ...Find the original parts here: https://www.thingiverse.com/thing:1163884

Building a drone for my nephew - I love the firefly design, but he isn't quite ready for a full-on FPV racer (yet), and I don't need the ESC mounts in the arms, so here we are! I adjusted the stock M3 arms to be a little stiffer/lighter (roughly 4g...

This arm is for the Firefly Pro and is designed for my 28mm motors.

Creating a Drone called the Firefly and needed a 22mm spacer so made one in 123D Design. ...Simples. Link to the Firefly Pro http://www.thingiverse.com/thing:1163884.

Print with support coul dbe a good idea ;) Print Settings Printer: DIY Supports: Yes Resolution: 0.2 Infill: 100 Notes: I printed the whole Firefly PRO in 100%... Is that right.. dont know, i though it help with the ressitance to crashes... Better...

Mod for the use of a HC-SR04 sonar on the Firefly Pro To do: Test print

To fit Afro Race 20 Mini ESC with BEC Print Settings Printer Brand: FlashForge Printer: FlashForge Creator Pro Rafts: Yes Supports: Yes Resolution: 0.3mm Infill: 25%

... in the front. Plates are made 5 mm wider on each side. Also you will find two modified front arms with cuts for the dampeners. For the missing parts you need to build the firefly pro please check the information on the left where it is remixed from.

... in the front. Plates are made 5 mm wider on each side. Also you will find two modified front arms with cuts for the dampeners. For the missing parts you need to build the firefly pro please check the information on the left where it is remixed from.

Mounting plate for GoPro

Remixed to support FPV gear 26x26mm camera, video transmitted at the rear, and add/shifted a few openings around. Update: v4 has been posted with less holes to help with weak points, larger front part of the bumper, and moved the standoff holes back...

Mounting plate for GoPro

This is my remix of Firely 250 PRO, it is modified to fit biger PDB and bigger ESCs, I used 35A ESCs You can now watch it crash here: https://youtu.be/kRvQqOa-z0I Please note that I forgot to calibrate my ESCs, that was the reason it did not fly very...

I wanted more strength out of my arms, so I made this one continuous unit arm. Its a couple millimeters shorter than stock. Also comes with a matching motor guard. I printed it on low settings in Cura. .2 mm layer height. 30% fill. with...

This is an integrated and orientable support for eachine FPV camera like this one http://goo.gl/UNqgAe

I made this to fit my antennae at 45 degree angle in order to get better reception when flying since obviously the drone tilts forward. The original placement was fine but whenever I flew facing away from me I lost signal since i was below the...

Print two side pieces, one connector piece, slide together. Fits directly onto 2mm camera plate with no modification. ...No glue required, strap holds the whole thing down.

V3.0 - Added a couple of fixing holes for the ESC cover V4.0 - Motor fixing holes corrected so they are at 45 degrees. V4.1 - Also added a small slot to pass cable through as the Cables on the Emax RS2205-S Motors are too stiff to bend round the...

This is a remix to easily fix the LT200 video transmitter (or others eachine video transmitters). ...I use a Velcro strip to securely attach the transmitter, in case of crash, the transmitter can easily eject without breaking the antenna connector.

All I did was modify the location of the battery connector hole, and the back flap to make it 50% thicker, mine kept breaking in crashes.

I wanted a non-rotating mount for my FPV cam, I like a 25 degree incline so that's what this is fixed at.