printrbot simple v2 3d models
355242 3d models found related to printrbot simple v2.thingiverse
Small feet for the printrbot simple V2 to improve stability. For best results, glue them to the wood. Instructions Printing on the lowest resolution settings as a good finish is not necessary. ... ...
thingiverse
Modifications and add-ons for PrintrBot Simple V2. All items designed at 3dtin.com and I couldn't figure out what the heck their units were doing, so everything needs to be printed at 0.7 scale - sorry! Edit: Added a second revision of the flanged...
thingiverse
Here are some of my Printrbot Simple mods that I think are essential upgrades! The filament guide is a derivative of thing:128240 by johnbiehler. I added a feature on top to attach a 1/4" PTFE tube (from Lowe's) to guide the filament in better...
thingiverse
Just a Filament guide for the Printrbot simple with a 12 mm straw designed in that T whipped up in Sketchup . Prevents the filament from slipping off of the drive gear and also is a snug fit so the the guide does not slip out. Instructions Printed...
thingiverse
Printrbot modified this area to eliminate the removable filament guide and closed up the opening used for this filament guide/fan mount combo. The other fan mounts should still work without issue. Having difficulty with heat above the hot end so...
thingiverse
This will not work for Simple V2 ordered after October 2013. Printrbot changed the design around that time to close up the required opening. Tired of filament constantly drifting and jamming, I tried John Biehler's version that incorporated the...
thingiverse
In response to multiple requests I have developed this GT2 timing belt conversion for the Y axis of the Printrbot Simple. This thing is similar to my original http://www.thingiverse.com/thing:180146 Differences are: Use GT2 belt & pulley...
thingiverse
This is for the Simple V2 w/o String tension. AFTER 10/23/2013 Printrbot added the string tension device and the mounting locations changed and will not line up with this design. If you want high quality parts than this is your ticket. This...
thingiverse
This will work for both V2 designs (with & w/o string tension) In response to multiple requests I have developed this GT2 timing belt conversion for the X axis of the Printrbot Simple. This thing is similar to my original...
thingiverse
This is for the Simple V2 WITH String tension ordered AFTER 10/23/2013. For models w/o string tension see http://www.thingiverse.com/thing:180146 The motor mount and tie bar are identical on both MXL designs. Having difficulty keeping consistent...
thingiverse
http://www.thingiverse.com/thing:180146 REV B: Add alternate X Belt End Mirror for Simple V2 With string tension device (models ordered after 10-23-2013). Add chamfer to belt ends to give a little more clearance for motor plate at both ends of...
thingiverse
... to misplace any tiny loose objects, I created this 41mm wide little tool holder to keep the main things I need at hand, but out of the way. I've attached the holder directly to the printrbot with velcro, so I can change it out as my tools change.
thingiverse
This is for the Simple V2 w/o String tension ordered BEFORE 10/23/2013. For models WITH string tension see http://www.thingiverse.com/thing:220484 The motor mount and tie bar are identical on both MXL designs. Having difficulty keeping consistent...
thingiverse
Add on guide for Printrbot Simple V2 extruder to enable it to use NinjaFlex flexible filament. May work with other flexible filaments. Version 2 provides extra support. Instructions Requires drilling...
thingiverse
This is a printable version of the nozzle fan mount supplied with the Printrbot Simple V2. The mounting holes are sized for a regular 40 mm fan, not the fan supplied with the Printrbot kit. Derived from original Simple...
thingiverse
Printed on my Printrbot Simple V2 at 45mm/sec, 0.2mm layer height and 10% infill. I bought the fan on Amazon: Scythe 40x40x10mm Fan 2 pin with 3 pin adapter. ... http://www.amazon.com/gp/product/B000RD0RDU/ref=oh_details_o03_s00_i01?ie=UTF8&psc=1
thingiverse
Printed on my Printrbot Simple V2 at 45mm/sec, 0.2mm layer height and 10% infill. I bought the fan on Amazon: Scythe 40x40x10mm Fan 2 pin with 3 pin adapter. ... http://www.amazon.com/gp/product/B000RD0RDU/ref=oh_details_o03_s00_i01?ie=UTF8&psc=1
thingiverse
It was time to clean up the cables going to my extruder and hot end. This uses the existing bolt locations on the Y axis, and tie-wraps to the back of the Printrboard frame. The cable is allowed to move in all three axis, so alignment is not...
thingiverse
This is for the Simple V2 w/o String tension. AFTER 10/23/2013 Printrbot added the string tension device and the mounting locations changed and will not line up with this design. If you want high quality parts than this is your ticket. This...
thingiverse
... the heatsink. 40mm_noctua_printrbot_simple_metal_v2.stl Open center 40mm_noctua_printrbot_simple_metal_4.stl my SinisterSwarm Gamer tag Print Settings Printer Brand: Printrbot Printer: Simple Black Rafts: No Supports: No Resolution: .2 Infill: 36
thingiverse
The TensionBlockYGT2.STL did not slice correctly for me; the angled opening at the bottom was missing. ...Here is a version that works for me.
thingiverse
I tried printing the hinged version, but sadly, my printer wasn't up for the task. Probably the settings, and there was a mesh error with repetier-host V0.90C. Tried the older slicer version, but gave up after the fifth try. Attached files worked for...
thingiverse
Note = If you don't want to lose any of your print volume in the X axis, you'll need to cut some material off of your Printrbot Simple. You'll need to cut out one or two notches, depending on if you use one or two tensioners. I've included a pic...
thingiverse
I made this because I was unsatisfied with the available choices for spool holders that could be made within the Simple's small build volume. It's a work in progress, but it gets the job done currently. Edit: I have now changed out the STLs with a...
thingiverse
I really liked the knob that owens made for the Z axis on the Printrbot Simple. When I downloaded his part, I discovered the hole didn't go all the way through, and the nut fit was very tight. So I created a new version that is just like his, but...
thingiverse
The Hotend fitting is an adaptation of one of the fittings in Printrbot Simple Bowden conversion by owens to make it fit the new extruder location. Instructions Print 1 of each component, apart from...
thingiverse
Thing to hold a variety of filament spools on top of a Printrbot Simple Metal. Designed to hold the spool clear of the full travel of the Z axis, with a minimal mechanism. The spool might spin OK w/o the bearings, but, hey, why not ? Uses 4...
thingiverse
This upgrade uses 400mm rods and a 12x6in aluminum plate to extend the build volume of the Printrbot Simple to ~140x290mm. The bolts attaching the metal plate to the upgrade are countersunk so they sit flush, increasing printing area to near full.
thingiverse
After releasing my initial upgrade, I came across several issues: the pressure of the shroud was too great for the wee little CPU fan, the large size of the shroud meant it was prone to damage, and the shroud also hit the Printrbot's base when it was...
thingiverse
This Locking Extruder Handle is a Refined version of my first Printrbot Simple Metal Locking Extruder Handle http://www.thingiverse.com/thing:651391 which locks in both the open position (to feed in new filament) and the closed position (locked down...