qidi 3d printer
1812022 3d models found related to qidi 3d printer.thingiverse
... QIDI Tech printers which comes with a chrome spool holders that will only work with QIDI filaments. ...The spool extender will allows other brands to fit such as Hatchbox. Print Settings Printer: QIDI Rafts: Doesn't Matter Supports: No Infill: 100%
thingiverse
My spacer is loosely based on the design used by this author:http://www.thingiverse.com/thing:1394527 Unfortunately, that one didn't work as the holes were too small for my printer so I whipped up a similar design which I printed at 100% in PETG and...
thingiverse
Make it to lock the door in open position Print Settings Printer: Qidi Tech Avatar IV Rafts: Yes Supports: Yes Resolution: 0,2 Infill: 15
thingiverse
Filament bearing Filament brakes: 1.6mm 2.4mm (stronger)
thingiverse
I found a 3D printer farm that mounted Stovetop Fire Stop units on the shelving above his 3D printers. I don't have shelving above my 3D printer so I came up with this solution. I made this to install to the cover for my QIDI X-Plus and X-Plus II....
thingiverse
The clips that hold the bundle of wires on my QIDI 3D printer broke. This is my attempt to design a replacement. ...It is a little tight, but works.
thingiverse
I made this tool tray to hold various accessories that came with my Qidi printer as well as markers and things. ... The holder has room for: - Leveling card - Scraper - 6" scale - 2 small pliers or cutters (one flush cut & one needle nose in...
thingiverse
A simple spool holder spacer for a Qidi Tech 3d printer. This spacer can be placed between the body of the printer and the spool holder to extend it for wider rolls. Spacer printed in red ABS on a Qidi Tech 3d printer. Rafts and support materials...
thingiverse
Made this up for my QIDI printer as the source model doesn't work because there is a different corner profile on the QIDI.
thingiverse
This is a copy of the nameplate on the front of the QIDI X-one2 printer. It includes an embossed logo and text which stands 1mm above the face of the nameplate. ...
thingiverse
... thought that it might be useful. ...I have a Qidi Tech 1 and X-Pro, I just tested it on the Tech 1. It fits a 1kg printer spool perfectly, with some slack, so should work with other 1kg Spools. ...You will just need an M10 x 50 bolt, nice and simple.
cults3d
... thought that it might be useful. ...I have a Qidi Tech 1 and X-Pro, I just tested it on the Tech 1. It fits a 1kg printer spool perfectly, with some slack, so should work with other 1kg Spools. ...You will just need an M10 x 50 bolt, nice and simple.
thingiverse
You need to print: support-side_window-qidi_printer.stl: 2 each latch-side_window-qidi_printer.stl: 1 each The parts mount using the existing screws and nuts that hold the side window, so no additional parts are required. The Magnetic Latch mounts on...
thingiverse
Print Settings Printer: QIDI Tech 1 Rafts: No Supports: No Resolution: Standard (0.2 mm) Infill: 15% Notes: I didn't use a raft. I have not had issues with my parts adhering to the print bed (just the opposite. Mine tend to stick like they have been...
thingiverse
... the orange models. Enjoy! Print Settings Printer: QIDI Rafts: No Supports: Yes Infill: 100 Notes: I printed in PETG with 100 % infill. I'm sure you can get away with less infill. ...I also used supports but it seems they were not necessarily needed.
thingiverse
The Qidi 3D printer is great, but the door doesn't have a stop, so it kind of just hangs there. This bugged me so I made a small magnetic stay. This screws under the door handle, and you can put a small collar stay magnet in the hole. I had a bunch...
thingiverse
This is a simple cover which snaps over the spool nut on the inside of the printer. It's a really, really odd thing to print, but it fits well. Made to match the style of the other QIDI parts I've printed. ...
thingiverse
This Gcodes for slicing and generate gcode (for printing under Cura 4.1.0) for QiDi X-one printer This will automatically: -waiting for selected temperature -clean nuzzle(draw line) -in the end drop bed to bottom so you can easy remove your item. *...
thingiverse
Print Settings Printer: QIDI Tech Rafts: Doesn't Matter Supports: Yes Resolution: 0.12 Infill: 30% Notes: Printed in ABS with 3 shell layers, 7 top and bottom layers. ... My infill for these parts was 30% and layer height 0.12mm, feel free to change...
thingiverse
Print Settings Printer: QIDI Tech Rafts: No Supports: Yes Resolution: 0.12 Infill: 30% Notes: Support used on interior to make sure acrylic mates properly. Printed in ABS with 3 shell layers, 7 top and bottom layers. ... My infill for these parts was...
thingiverse
Print Settings Printer: QIDI Tech Rafts: No Supports: Yes Resolution: 0.12 Infill: 15% Notes: Support used on interior to make sure acrylic mates properly. Printed in ABS with 3 shell layers, 7 top and bottom layers. My infill for these parts was...
thingiverse
It is specifically designed for the Qidi Tech 3D printer but it should work on the Flashforge also. Designed in Solidworks 2016. I've included the 3D model in Solidworks and IGES format. ...Print Settings Printer: Qidi Technology Rafts: No Supports:...
prusaprinters
I just recently converted my Qidi X-Plus over to a Lerdge K setup like my X-Pro. I wanted to keep the FFC ribbon cable setup but add the auto leveling functionality now available to me. I tinkered with several addon mounts but none of them seemed...
thingiverse
... hole is drilled, and holes for attaching the fan and holes for attaching it to your printer's frame. Put the fan at the outside of the plate, the filter at the inside (there is not enough room to put the fan inside the printer). ...That's it!
thingiverse
I have also made an easier solution for upgrading your Qidi 3D Printer to Igus Polymer Bushings here: https://www.thingiverse.com/thing:2572425 These are models made to fit the stock Igus Drylin RJ4JP-01-08 bushings. Tolerances will vary per printer...
thingiverse
How I Designed This This object is a combined remix of a GoPro camera mount http://www.thingiverse.com/thing:40282 by mark133, and a flange mounted utility bin for the QiDi 3D printer http://www.thingiverse.com/thing:1495535 by cncartist. ... Many...
thingiverse
... please continue to print the rest 2 files) 2.print the "【起迪-Max】双Z单头-UI" file 3.print the " PLUS X-plus参数10毫米.gcode" file After you print all the 3 files,the updating will be done. Im include also Cura Ultimaker profile for qidi 3D printer
thingiverse
... Fusion 360. ...This jig utilizes the blue PTFE cutter that comes with the PTFE tubing that is used on a variety of 3d printer extruders. This jig cuts 45 mm sections for use on a Qidi XMax 3d printer extruder. ... No supports or raft necessary.
thingiverse
This is for the QIDI 3D printers. The side windows on the QIDI are removable, but are held in place with M4 screws and nuts. I frequently need to remove these windows and wanted a no-tools-needed solution. This approach provides four small...