runcam swift 2 3d models

I removed the strap portion of the above mount and added a tab which connects to my designed base which mounts to the Diatone Taycan Cinewoop frame (3" or 75mm) The base is printed in PETG or ABS and the runcam 5 mount is printed in TPU. The base...

This is the canopy that I featured in this build video: https://youtu.be/YxDOrr-jt40 I designed it for the Runcam Nano HD camera, which works with Shark Byte digital FPV. It should work with most other "nano" cameras with a 14x14mm back plate. The...

...There is not a lot of 3D part for this frame so far, so here is my own Runcam 5 camera mount for this frame! This first version is 25°, will upload more once fully tested. It is possible to fit ND filter up to 2x30x30mm in front of the camera.

This is a 25° tilt mount specifically designed for the uncased Runcam PZ0420M FPV camera. Tabs and holes on the base are custom crafted to neatly zip-tie onto a RCMC Juggernaut 300 frame, but can easily be modified to fit your unique frame plate...

Some basic mounts for the Runcam nano 3 FPV camera are designed primarily for whoops and Toothpicks. #### Toothpick Version A simple pod inspired by newbeedrone designs. The dimensions have been adjusted to fit the Nano3, with two ears that can be...

This is a TPU mount for the runcam split mini that can be screwed directly onto the topplate of a Helifar X140 Pro. It's also possible to secure it to other frames using zipties, although this may not provide the same level of stability. The mount...

These are parts to increase the height of the canopy on the stock Emax Babyhawk Race so that you can accommodate a camera with a larger lens such as the Runcam Micro Eagle without cutting anything or making any modifications that cannot be undone. I...

A protective enclosure to house the Caddx Turtle V2 camera with a RunCam TX200 vtx or similar size that mounts on the rear of a micro camera is needed. The canopy in the photos is printed from NinjaTek Armadillo 75D TPU, but it can be printed from...

Installing a RunCam Split 3 Nano Lite (usually valued at around $50 USD) into this housing gives you MANY of the same benefits as the Naked GoPro, with no disassembly steps, no alternative hardware requirements, no warranty voids, and for much less...

I have increased the height of the camera protection a bit to protect those original RunCam Nano3 lenses I have (and covet). Rotate the frame so that the USB port sits next to the angled brace (normally at the front of pre-built models) facing...

https://www.facebook.com/framefpv/\r\n\r\nFreestyle Version 20 degree: https://www.thingiverse.com/thing:3130484\r\n\r\nLink to the frame:\r\nhttps://www.getfpv.com/astrox-x5-freestyle-frame-johnnyfpv-edition-6370.html\r\n\r\nLink to the...

This is a custom adapter I designed based on my previous Runcam Owl adapter. I'm transplanting that build over to the SpaceoneFPV 220X frame with Aero pod, which was designed by @babar121, and my original design doesn't fit as expected. I thought it...

Taylor Swift 3D Model Now Ready for Instant Printing, a Stunning 3D Print Model Stunning 3D Figure of the Iconic Taylor Swift, Learn More at Wikipedia - https://en.wikipedia.org/wiki/Taylor_Swift This model is optimized for use with high-quality full...

1080p 5MP OV5647 camera module M12: https://www.aliexpress.com/item/OV5647-5MP-night-vision-raspberry-pi-camera-module-with-adjustable-focus-3-6mm-lens/32822231049.html M12 Action camera lens with built in IR filter:...

This is a Mount for the Runcam Thumb Pro, based off the rather nice looking model by JoyMonkey (available here: https://www.thingiverse.com/thing:5433478). I plan to make some various other mounts for this camera,so stay tuned, and don't be afraid...

It is specifically tailored for use with the Micro Swift or Foxeer Micro Arrow. Crafted from high-quality materials, this frame is made exclusively for the VX110-110mm Wheelbase 3mm Arm 3K Carbon Fiber X-Type Frame Kit from Banggood:...

Rotor X Atom V3 Reworked to Incorporate Spacers on 35-Degree and 2-Millimeter Mounting Points

For this mount you need 2 m2x12 bolts, 4 m2x4 bolts, and 4 m2 nuts

It requires 4 M1.4x14 screws to mount the stack on the mob7 frame, 2 M1.4x6 to clamp the top bracket and 2 M1.2x4 screws to fix the camera on both sides.

Clip permettant d'accrocher le cordon de relevage de la plage arrière sur les Suzuki Swift. ...Essai, imprimé en PETG, l'été qui arrive nous dira si le clip résiste à la chaleur dans l'habitacle.

now you can tilt camera more! ...Print Settings Printer Brand: FlashForge Printer: Creator Pro Rafts: No Supports: No Resolution: 0.2 Infill: 100 Category: R/C Vehicles

... check out the Femto mount I have for this frame. Thanks to the original creator of the Runcam mount. Modified it in TinkerCAD. ... 45-degree version added with holders for antenna tubes and longer standoffs that can be trimmed to desired height.

Remixed this mount to fit the Hdzero Camera in my Apex. ...No standoffs are in frame. I printed at 0.2 with 100% infill.. ...Print laying flat and duplicate and mirror to get both sides.

See my other designs for the adapted canopy. ... I used two 9g MG90 servos and adapted the pan servo to be 360degree (not essential but very cool) Printed in PLA at 0.2 with 60% infill and supports at 3%

... on Wizard x220,but fits. ...I attached a .blend file so feel free to widen it a bit if needed. You might need a brim, but I did it without and worked great on Creality Glass Bed. My setup: 0.4mm nozzle, 0.2mm layer height, 0.8mm walls (2 walls).

Depending on the material, reduce the scale (down to 97%) I used TPU A93, and scale 97%. ...It fits tight as it should. It weighs around 2.5 gramms. ... I've printed it on my Ender 3 Pro with stock bowden.

You'll need 2 M3 screws for the front threaded holes and 2 M2 screws for the rear holes that aren't threaded. If you enjoy my designs, consider buying me a beer. Donations are accepted and greatly appreciated. Send them to airmaxx23@gmail.com via...

For assembly, use either 2.2mm tap screws or directly screw in an M2 into the plastic. Various angles are available for installation. Options include a 10-degree angle, a 15-degree angle, and a 20-degree angle. ...To prevent camera damage in the event...

... during a crash. 2. Without tabs, held in place by tape only to minimize vibrations even further. Both designs can be printed together within an hour flat. ... Printed with ABS material, but TPU might prove better suited for this application.

2 parts. -There is an insert to replace the poorly designed anti vibration unit that adds more vibration than it takes out. -And the actual camera mount. Use a Velcro strap to hold the camera in. ...Print instructionsUnassociated tags: Arial...