voxelab filament 3d models

Created these bases for my Voxelab Aquila. This consisted of extending the left side of the base and adjusting the location of the screw hole to fit on the Aquila. Did this for the Blokhead / Bullseye base as well as the v2 Petsfang base. Original...

However I noticed that for the Ender 3 clone, Voxelab Aquila, the ENDER3_4MM_8.17 light bar collides with the longer lower screw of the hotend carriage. I simply trimmed off 3mm from the bottom which should give clearance without having too big of an...

Created these bases for my Voxelab Aquila. This consisted of extending the left side of the base and adjusting the location of the screw hole to fit on the Aquila.Did this for the Blokhead / Bullseye base as well as the v2 Petsfang base. ...Original...

So I modified ianewby's hot-end mount to accept the voxelab chains. Additionally I beefed up where the link attaches, and included a file for a beefed up link. ...I found that the original links sag under weight with time (and I was having the worst...

This is a storage box for the Voxelab Proxima or Polaris printers. This also fits the 3D printed Vat that i made previously. The box size is approx 235x150. The four compartments can be used for spare bolts and rather than changing them so that lids...

This is a remix from the HMG5 gantry adapter "Ender_3_v2_OEM_Gantry_Adapter_9A" to better fit the X-Axis mount on the Voxelab Aquila. It still needs tweaking, unfortunately I haven't had the time to get it perfect and the wife has conscripted my...

This is a lid riser for the Voxelab Proxima 6.0 to use the Photonsters PTC Heater Unit (https://www.thingiverse.com/thing:3442165). With this riser you can insert the heater inside the printer without making a hole in the lid. There is also a...

This is a storage box for the Voxelab Proxima or Polaris printers. This also fits the 3D printed Vat that i made previously. The box size is approx 235x150. The four compartments can be used for spare bolts and rather than changing them so that lids...

It is top entry instead of bottom entry (like stock Voxelab Aquila), because I hate flipping the printer on its side to get to the mainboard. T.he SKR 1.4 (and turbo) only just fit so wiring is a faff. Also, I use octoprint with a PI contained in...

1-4-2023 CR-touch version added 12-3-2022 V2 added with and without BLtouch mount VOX FANG is a fang style shroud for the Voxelab Aquila, Aquila X2 & Aquila C2 (They all use the same hotend so it should fit all 3) *Uses stock fans *Has BL touch mount...

I wanted to try out direct drive on my Voxelab Aquila and I wasn't sure if the models for the Ender 3 would work on the Aquila because things are slightly different between the two printers. I ended up modeling a mount using my own measurements...

This thing fixes a major design flaw with the voxelab aquila and ender 3 v2. The original PSU shroud completely blocks the vents which allow for airflow inside the PSU, causing the fan to run almost 100% of the time and likely shortening the life of...

This is a remix of Ender 3 Pro PSU Meanwell LRS 350 PSU Honeycomb Cover by qrrak https://www.thingiverse.com/thing:4571351 and Voxelab Aquila/Ender 3 v2 PSU Cover with cable management by ddonnie https://www.thingiverse.com/thing:4831917 Hopefully...

This Raspberry Pi 4b Case fits under the right hand front cover on the Voxelab Aquila 3D Printer It's designed for a 4020 Noctua NF-A4x20 5V, Premium Quiet Fan, 5V Version fan and draws fresh air over the heat sinks. Keeps the PI quiet and very cool...

this is a remix of thing:4915344, the wheel does work OK as in the original design, but the detent part doesn't fit on the Voxelab Aquila's Y-carriage plate on it's power-side (back left), though there's another remix that already fix this into a...

... printed one for my Aquila. This remix adds three reinforcement spines in that location to beef it up a little. Print Settings Printer: Voxelab Aquila Rafts: No Supports: Doesn't Matter Resolution: 0.2mm Infill: 15 Category: 3D Printer Accessories

Have been printing up the parts for the Voxelab Aquila chain from antibimmer's release here (https://www.thingiverse.com/thing:4725903) but liked the hot end design from CazGaming here (https://www.thingiverse.com/thing:4941347) as it aligns with the...

Also, the Voxelab Aquila ships with a hotend fan and 1 print cooling fan. Having only 1 print cooling fan means that one side of your prints will suffer from less than optimal cooling. I designed this fan shroud to use the factory supplied...

For the convenience of controlling the position of the faceted pen, I made a hole on its upper surface where you can insert a piece of colored filament. After printing a faceted pen, the hole for the indicator should be slightly cleared. A piece of...

The included files should allow you to convert Voxelab's proprietary hot-end to a Micro-Swiss style all metal hot-end. Besides being an upgrade to the strange heatsink design, also allows the use of standard MK8 threaded nozzles. The adapter fits...

Customized Hero Me Gen7 v2 base for the Voxelab Aquila printers. Created this because I found the original design a little bulky (required gantry adapter and hotend mount). Additionally, DD mounts were limited to front and back (wanted side for...

This is a BL Touch/3D Touch mount for the Voxelab Aquila. It can be adjusted up or down to get an ideal probe height. This means you can set it higher, to get the probe further away from the print, or lower, so the nozzle is further away from the bed...

Customized Hero Me Gen7 v2 base for the Voxelab Aquila printers.Created this because I found the original design a little bulky (required gantry adapter and hotend mount). Additionally, DD mounts were limited to front and back (wanted side for better...

Convert the Y-axis of your Voxelab Aquila into Linear Rail. Non Invasive so you can go back to wheels at any given time. It was inspired by: https://www.thingiverse.com/thing:4553090 which I use on my Artillery Sidewinder X2 and I'm satisfied of...

I wanted the stowable pi cam mount on my printer, but the Voxelab Aquila is a clone of an Ender 3 V2, not an exact copy -- the Aquila x-axis mount gives the original Stowaway Pi Cam for Ender 3 ( https://www.thingiverse.com/thing:3426025 ) nowhere to...

... support needed for any parts. ...Ensure that the main mount is printed lying on it's back.Print SettingsPrinter:Voxelab Aquila Rafts: NoSupports: No Resolution: 0.2mmInfill: 20%  Category: 3D Printer Accessories

This is a cover for the Voxelab Aquila printer's mainboard. It allows for the installation of a larger/quieter fan. Unfortunately, the 80mm fans out there are usually not 24V fans, so you have to install a buck-converter to get the 24 volts from...

This is a cover for the Voxelab Aquila printer's mainboard. It allows for the installation of a larger/quieter fan. Unfortunately, the 80mm fans out there are usually not 24V fans, so you have to install a buck-converter to get the 24 volts from...

The new fan duct name is; fanduct 4mm smaller 1PB SMALL.stl - source .skp also here UPDATE 2/16/21 - Remixed a BLTOUCH mount by hav22 - Now installed and working with BLTOUCH (3D Touch actually from Triangle Labs). I was not happy with the fan shroud...

When overloaded, the TPU filament comes off the guide rollers. I devised a guide cap to solve this problem. It can be used just by inserting it. The filament is PETG. The resolution (Z) is 0.1mm because the parts are small. Notes Make...