1-10 RC 2-Piece 5-n-1 Rim Design by SlantedRC

thingiverse

2-Piece 1:10 RC Rim Design by SlantedRC I've designed this as a two-piece wheel. The idea behind the design, is to use the same Barrel (inner-barrel and outer-barrel is one-piece) with different disc designs. This will enable you to use the same set of tires with multiple wheel designs, and also save you a ton of time and filament as you would only have to print the barrels once and each disc design separately. Small screws to be used to fix the disc to the barrel. Since I have not printed one of these yet, you will have to let me know what worked for you? CHANGE LOG: - Increased the thickness of the barrel walls - Added a "rib" to the barrel - Repaired some potential issues I regretfully didn't spot earlier - Added two additional disc designs to the mix - Modified the "rib" design - Increased the hex fixture thickness for added support - Added 3x wheel fastening tabs and modified the inner tab to allow some clearance - Added three additional disc designs - Removed the solid STL's (Each solid STL will be uploaded as a separate "thing") - Drift tire is work in progress and was uploaded (Link: https://www.thingiverse.com/thing:3580781) - Disc mounting points size/length increased (Thanks to recommendations provided by user ABavuso) - Thorough inspection performed on all drawings and various misaligned faces repaired. This is the final version of the wheel design. An improved version will be added some time in the future. Renderings of updated drawings not uploaded due to time constraints (and laziness..sorry) Drift tires developed specifically for these rims can be found here: https://www.thingiverse.com/thing:3580781/ Product is yet to be printed, tested and reviewed, and potential flaws on drawings may still need to repaired. I rely on your feedback to fix any issues with any of my designs, and appreciate any and every comment you can provide - THANK YOU IN ADVANCE. Should you have a custom request, please get in touch. I will gladly assist where and when it's possible. This design was published to be used and printed free of charge and not to be distributed or sold for profit. (My contribution to RC Hobbyists to try and keep it as affordable as possible). Printing, installation and usage is done at your own risk. Please post a photo of your installation on our Facebook and Thingiverse wall if you opted to use the design. Facebook: https://www.facebook.com/SlantedDriftSquad/