1,2,3mm feeler gauge
thingiverse
This is a simple feeler gauge I created. It has 3 tolerances stepping up 1mm at a time: 1mm, 2mm, and 3mm. It can be used for anything. I printed it for setting the distance for my EZABL sensor from the buildplate. TH3D recommends the EZABL be 2mm from the tip of the nozzle, and 1mm from the tip for the EZABL mini. The gauge can be used for whatever you need it to be used for. Mine printed nice and when checked I read the following on my micrometer: Desired: 1mm; measured: 1.05mm Desired: 2mm; measured: 2.03mm Desired: 3mm; measured: 3.04mm I used PLA for this print set on normal 0.2 resolution, 100% infill with a 0.4mm nozzle. You can print with a raft if you like, I did so to ensure any leveling issues would be eliminated during the raft print. I hope it's useful.
With this file you will be able to print 1,2,3mm feeler gauge with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 1,2,3mm feeler gauge.