1:200 Scale SpaceX Falcon 9 and Falcon Heavy

cults3d

This is a 1:200 scale model of the Falcon 9 and Falcon Heavy in their final major iteration, Block 5. I couldn't find a model that was printable at this scale that had parts separated by color so I could avoid painting. They both stand 350 mm (13.75 in) tall. IMPORTANT NOTES: The raceway will probably require a bit of sanding to get a nice snug fit into the booster The smaller raceway is just ~180 mm of 1.75 mm filament. I used a space heater to heat it slightly and straighten it out. Then I ran a small bead of superglue down the booster and pressed it in. The triangular connection pegs on the gridfins and FH_struts are fragile due to their small size. Be careful when pressing them in. If you need to pop one out, use something pointy and push it out from the inside. Parts for the Falcon 9: 1x stage_2_and_fairing 1x F9_interstage 4x gridfin 1x booster 1x raceway 1x ~180 mm of 1.75 mm filament 1x F9_gear 1x merlins Parts for the Falcon Heavy: 1x stage_2_and_fairing 1x FH_interstage 2x FH_nosecone 12x gridfin 2x FH_strut 3x booster 3x raceway 3x ~180 mm of 1.75 mm filament 1x FH_gear 3x merlins