1/35 scale square fuel cells that are commonly found on early KV-1 and KV-2 tanks.

cults3d

1/35 scale square fuel cells that are commonly found on early KV-1 and KV-2 tanks. I am providing files for a strapped fuel cell and a strapped fuel cell with overhanging straps. The straps can be trimmed to size after being attached to the model. Both models will be provided with or without supports. The tiny supports under the threaded bolts should be removed, but I have found that they disappear on their own during the washing process. Supports under the straps and hooks are not holding the model to the base; they are simply there to give the part something to attach to during the printing process. They come off easily. The supports on the outer edges of the model are not as strong as those in the center. I do this to make clean up an easier task. I have personally found that for best results. I work in this order. Print, wash, let dry fully, remove the supports, cure, and sand or clean off the debris. These models are for personal use only. You may print as many as you want for yourself.