1/6 scale base for NeoGeo Mini with opening door and internals

thingiverse

A better version of my base for the NeoGeo Mini with an opening door and internal electronics. The model requires the Mini to be opened for a secure fit or you can exclude the connecter at the top and the lip part to have the Mini rest on the top. The door requires a piece of PLA to be ran through a hole in the top of the base then through a hole in the door to act as a hinge. The internals are glued together then placed in the top of the base then can be glued to the base. If you have some extra wires hanging around you can glue those to the internals for a little more detail. the only parts that need supports are the door and door frame. The door should be printed up right for the best detail on the coin slot. I recommend gluing some washers between the base and internals as without them it will be very top heavy.