1/7.5 SCALE T-2A Buckeye RC Model Jet

cults3d

This 1/7.5 scale T-2A Buckeye was designed to achieve a high level of scale fidelity, including panel lines and raised panel detailing throughout the airframe. Pre-hinged gear doors are included, and spaces throughout the airframe have provisions to allow the installation of LEDs for navigation lights. The thick airfoil and straight wings allow for relatively slow flying and mild stall characteristics. Powerplant: 80-90mm EDF (4kg thrust minimum) Cell Count: 6-12S Wingspan: 1550mm(61 in) Length: 1560mm(61.4 in) Wing Area:41.23 dm2(639 in2) Free assembly manual can be downloaded from my profile, via the free T-2A tail section.https://cults3d.com/en/3d-model/game/1-7-5-scale-t-2a-buckeye-rc-model-test-files NOTE: Model is designed to fit on the PRUSA MK2S (205x250x200). The largest piece Fuselage4 is "225x180*158" but can be split into 2 sections and glued back together easily. Majority of remaining pieces fit on a 200x200x200 build volume. Full download contains both STLs and Gcodes. The Gcodes are specific for the Prusa i3 and for ABS as the primary material to print the fuselage. Remaining Gcodes are set as PETG for Light Lenses, PLA for Landing Gear, and TPU for Tires. Design is based on a 2-perimeter (0.8mm wall thickness) construction approach to minimize the amount of internal supports needed. I am utilizing ABS as the parts can be welded together with acetone, and weigh ~15% less than PLA Build thread located here:https://www.rcgroups.com/forums/showthread.php?3536321-1-7-5-Scale-T-2A-Buckeye Onboard flight video:https://youtu.be/FDb0RRUun1A Features include: -Alignment tabs that provide additional glue surface and easier assembly. -Built-in servo hatches -Removable Tip Tanks and horizontal stabs -Plugs for vacuum forming clear canopy glass