10" Server Rack

prusaprinters

<p>Here is my 10" server project to store 2 Raspberrys with Repetier Server with 2x12 Prusas<br>All panels are aligned with the front on the print bed.</p><p><br>1. Fan slot<br>This panel is to keep the distance to the fan. Here 0.4mm is printed black, then a filament change to silver, again 0.4mm, then black again.<br>2. Free slot<br>This panel is printed single and will be used multiple times in my 15U project.<br>3.Power<br>This panel will be printed like Fan Slot again. 5mm LEDs<br>4. Raspberry<br>I made the Raspberry Pies once on the left and once on the right.<br>It's only for visual reasons. It only fits the Pi version 4.<br>4 red and 2 green LEDs are used to illuminate the logo. Between the panel and the silver part I put some greaseproof paper, which I colored red and green with felt-tip pens.<br>5. Cable bushing<br>The panel is again printed face down. For optical reasons I glued a silver ring inside and outside.<br>6.TP-Link SG108E<br>The cutout is 26mmx158mm<br>7. USB hubs<br>Since the USB hubs are too big for one height unit, I combined them with the cable outlets. Here you have to print with support structures. The outlets are then smaller, so there are other rings here.</p>