10oz Caulk Tube Cap

prusaprinters

<p>There's a few of these I've seen on here, all of them seemed to not fit or grip well. It took a few experiments, but this one seems to work well for me. Its fit snugly, and held, on all the 10oz caulk tubes I've tried it on.</p> <p>You'll need to rotate it to print, as Fusion 360 leaves things on their side.</p> <p>Nothing special about printing it. If you don't have good bed adhesion you may need rafts or something, but on my printer, with a PEI surface, it printed without them.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Prusa</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Prusa Mk2</p></div> <p><strong>Rafts:</strong></p> <p>Doesn't Matter</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Resolution:</strong></p> <p>.2mm</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>Doesn't matter</p></div> <p><strong>Notes:</strong></p> <p>I printed this quickly at .2mm, no rafts. There's no infill because of the thinness of the walls, so it should just be a quick, simple print.</p> </p></p></p> Category: Household