12 SHOT DISPENSER v3.1

cults3d

Liquor distributor for 12x 2cl shots. -The distributor has a total diameter of 200mm. -The stand has a length of 75mm (10mm are inserted into the distributor). -The distance from the stand to the manifold tap is 65mm. -The set down holes are 38mm in diameter so that the glasses do not slip. Update 09/25/22 V2: Diameter expanded to 200mm and glasses "storage spaces" added. Liquor distributor was cut in 2 parts to shorten the printing time. Update 09/29/2022 Lower part has a slightly larger diameter at the column. You decide whether you want to have it fixed or pluggable ( Some grinding is necessary ) Flow channels have been revised. (CONNECTION to the inlet tank). Update 18.10.22 v3.1 For the dispenser there is now a funnel device that you can either close with a plug or you just put it in and open it by pulling it out again ;)