12V USB Charger Mount

thingiverse

I designed this mount for the B-pillar of a 3rd generation Honda Odyssey, but it will work in any application that requires a face-mounted charger. Though it was designed around [this](https://www.amazon.com/dp/B09TSL6F1B/ref=sspa_dk_detail_4?psc=1&pf_rd_p=386c274b-4bfe-4421-9052-a1a56db557ab&pf_rd_r=13YC6RXFBN6PV800KNV5&pd_rd_wg=ENUmz&pd_rd_w=SFqhr&content-id=amzn1.sym.386c274b-4bfe-4421-9052-a1a56db557ab&pd_rd_r=1e2a60c3-cde6-4198-b54e-9abb91f46f7f&s=automotive&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWxfdGhlbWF0aWM&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFYVTZBSExSQTFOQ1MmZW5jcnlwdGVkSWQ9QTA0Njc2NjAyT1pCUVVCOFg5WFlaJmVuY3J5cHRlZEFkSWQ9QTEwMzYwMzkxSDFRMEFFREoxWDlLJndpZGdldE5hbWU9c3BfZGV0YWlsX3RoZW1hdGljJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==) charger from Amazon, it should work with just about any 12V charger. I printed it with the flat face against the build plate and then used tree supports in Cura. Mounting this to a surface requires M5 hardware, and the four M5 nuts are designed to be captive within the print. For that to work, edit your g-code to pause the print just as the nut holes are complete then press in the four M5 nuts before resuming the print. The nuts should be a tight, friction fit and no adhesive is needed.