19 inch Rack Mount NOKIA BGW320-505

thingiverse

UPDATE I added files which use a dowel design, that should be small enough for ender v2. I haven't tried it because I don't own an ender v2. You should be able to simply glue the pieces together with no need for bolts. So if you want the ender/glue version, print the files with ender in the name. I wanted to rack mount my NOKIA BGW320-505 so I spent quite a bit of time designing this. If there is interest, I may make some improvements to the design, but it works fine as is. The modem simply slides in, you could use Velcro to secure it if you wanted. Special Thanks Thanks to moleculeblackout for the keystone jack design, I used it in this project. https://www.thingiverse.com/thing:4695995 Note If you don't need the keystones, you can't print 2 lefts, as the bolt holes for the left and right are not the exact same pattern when flipped upside down. Printing I printed mine in an enclosure, using eSun ABS +, 250C Nozzle, and 100C bed temps. I printed it with a .4 nozzle and set the speed slow, to 40 mm/s to prevent warping. 15-30% infill is plenty. Hardware To bolt the brackets on you will need M6x20 and matching nuts, or something close to that. You don't need longer rack screws to mount this. Please feel free to leave feedback, a big part of the reason I took on this project was to help others, and give something back to the community. Oh and if you can spare it, I'd appreciate you buying me a 6 pack, it took a lot of wasted filament to make this happen.