1U Rack Shelf Sides

prusaprinters

<p>This allows you to build a 1U shelf for a 19" rack common in audio and server hardware. Note that I don't recommend using it for anything that has to be road-worthy.</p><p><strong>Needed Materials:</strong><br>- 3mm plate, 442*195mm<br>- 6x M3*20 countersunk screws<br>- 6x M3 nuts</p><p>The plate width should be within one or two millimeters or it won't fit a standard 19" rack. The length however can be a bit longer (I used 225mm).</p><p>The screws can be longer (theoretically up to 44.45mm without interfering with the unit above). The screws can also be thicker if you drill out the holes.</p><p><strong>Assembly:</strong><br>Cut your plate to size and drill and countersink the holes. To get them in the right position, I clamped the sides to the plate and used them as a jig.</p>