2 Axis Gimbal for Directional Lighting
pinshape
2 axis gimbal which was optimized for directional lighting. The rotation joints print in place, and there are bumpers to add friction to the rotation so after the angle is set it will stay in place. You can sand the bumpers to change the friction of the rotation. There are four 4mm mounting holes on the base, and the socket is designed for a ceramic GU10 light-socket with an OD of 28mm. I used these: https://www.amazon.com/dp/B015OLHF34/?coliid=I1B7HFO3HLRCPP&colid=2VFGUXWPUDPWM&psc=1&ref_=lv_ov_lig_dp_it These GU10 sockets will work with any GU10 bulb. There are two versions, one prints without supports by using bridges to provide floating platforms. To clean the part, you just snip the bridges off! The bottom ones can be a bit tricky, I'd like to revisit them soon.
With this file you will be able to print 2 Axis Gimbal for Directional Lighting with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 2 Axis Gimbal for Directional Lighting.