2017+ Suzuki SV650 motorcycle turn signal adapter

thingiverse

Adapter to fit aftermarket turn signals/indicators to the 3rd gen 2017+ Suzuki SV650. Recommended to print in PETG or ABS to withstand the elements. PLA _will_ fail due to UV exposure. If you break your motorcycle, it's not my fault! Part provided with no guarantees. Installation: Print 2 per side. Remove meter visor (two screws on top, two on the sides) Remove two screws on each side of headlight, and rotate it to loosen the top Unplug gray and black plugs behind the headlight Remove the stock turn signals with an M8 socket (stock adapter will fall out) Put one adapter on the turn signal stalk Feed wires through the bracket hole Put on another adapter over the wires Put the nut over the wires, and tighten the turn signal; this will clamp the adapters around the bracket. Make sure everything seats flush Connect wires (you may need a wire adapter, or choose to solder one up) Turn on the bike and test out turn signals Reattach the headlight and meter visor!