210mm FPV Drone Multi Copter 3D printed

thingiverse

Work-in Progress nearly all my drones are too heavy for racing. So I wanted to design a drone that looked professional and had all cables hidden. Inspiration came from ZairoFW Drone. His drone is listed below. This drone is good but from looking at it it had so many parts to print. So this looked heavy for me. https://www.thingiverse.com/thing:2508543 I went on and design my own drone using a hybrid X frame. I ordered the parts first. These are listed below. Then I design my drone around them. making sure they all have adequate space to be installed. The FPV camera was going to have a housing of its own but there was so little space I redesigned it to be placed in the drone housing. This reduced the amount of parts and overall weight. BOM list; PDB - FC - <a href=https://goo.gl/LZzdQ5>Betaflight F4 Flight Controller</a> ESC - Motor - <a href=https://goo.gl/3UDEK8>4X Racerstar 2406 Green Edition 2300KV</a> Propeller - RC receiver - <a href=https://goo.gl/GDbrgG>Flysky 2.4G 6CH FS-iA6B</a> OR <a href=https://goo.gl/STxM5W>FlySky FS-iA6 2.4G 6CH </a> FPV Camera - VTX - FPV 210mm Drone Multi Copter. This is currently being printed and tested and redesigned. Assembly Vid posted on link https://youtu.be/Ic6hqOXoe88 18-04-2018 - All parts printed and assembled. some of the fitting required more clearance- fixed. The M3 screw holes are now 4Dia. Assembly vid will follow. Enjoy <a rel="license" href="http://creativecommons.org/licenses/by-nc/4.0/"><img alt="Creative Commons License" style="border-width:0" src="https://i.creativecommons.org/l/by-nc/4.0/88x31.png" /></a>