24V Motor Mount

prusaprinters

<p>I used PETG, so the heat of the DC motor doesn't deform the print. PLA could still work; obviously, don't let the motor get too hot. Printing is easy and supports come out quickly.</p><p>Required:</p><ul><li>Print at a 0.2 Layer Height</li><li>Print with 30% infill</li><li>Print at speeds between 45-60 mm/s</li><li>Print at 245º for PETG or 215º for PLA</li><li>Print with a Bed temperature of 80º for PETG or 50º-60º for PLA</li><li>Print using supports</li><li>Print with a Fan speed set to 25% for PETG or 100% for PLA</li></ul><p>Optional (for better-looking and stronger prints)</p><ul><li>Set your Z-seam alignment to random</li><li>Print with 6 walls and 6 top/bottom layers</li><li>Turn on Z Hop When Retracted</li></ul>