2D D&D Mini Holder

prusaprinters

<p>This is a holder for regular 2D printed pictures of monsters.</p> <p>Not all of us have fancy SLA printers that can print perfect minis. If you are struggling to print minis, you can instead use this holder and print photos of whatever mini you want. The paper slides right into the base. Print them in a variety of colors to make it easy to tell several of the same creature apart!</p> <p>The pegs are strong enough to be assembled and disassembled for easy storage if needed. If you find they are too tight, use a small file inside the base to remove any strings.</p> <p>Paper insert size is 18mm wide by 34mm tall. 1.5mm on each side is hidden by the slots.</p> <p>TODO: Add other sizes of minis.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Wanhao</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Wanhao Duplicator i3 V2</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Resolution:</strong></p> <p>0.2-0.3</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>75%</p></div> <p><strong>Notes:</strong></p> <p>Sliced in Simplify3D with these settings:</p> <p>Layer height: 0.2</p> <p>Top/Bottom solid layers: 3</p> <p>Outline/Perimeter Shells: 1<strong>with this set higher the base ended up with gaps around the post holes</strong></p> <p>A brim was needed on my printer to keep the posts adhered to the bed.</p> <h3>How I Designed This</h3> <p>Using Fusion 360. The design files are included if you want to modify it.</p> </p></p></p> Category: Games