360W PSU Cover Update

thingiverse

UPDATE: I have updated the STL file though I have not printed a new cover to picture. I have removed the letters from the grill. This is a remix of my original design. This design allows more space between the power switch and the plug in the side of the cover. This is a cover for a 12V 30A PSU that integrates a regular PC cord and a power switch. I am upgrading the power supply for my Anet A8 printer and I needed a cover and could not find anything I liked. The wiring may be a little tight, but I do not believe it will be any worse than some of the others, like the one I am using for my stock 20A PSU. you will need 3 M4 screws to screw the cover onto the PSU and 2 M3 screws and nuts to attach the IEC Socket. Power switch - http://www.ebay.com/itm/3pcs-Red-Pilot-Light-Heavy-Duty-110V-120V-AC-ON-OFF-Locking-ROCKER-SWITCH-R13C-/300720027395 I used one I had on hand, but that one should work. I also used a male plug I had purchased at my local electronics store but the one below should work. IEC Socket - http://www.ebay.com/itm/10-Pcs-Black-3-Pins-IEC320-C14-Inlet-Power-Plug-Socket-AC-250V-10A-/252183083124 Power Supply - https://www.amazon.com/gp/product/B01HPW00QY Print Settings Printer: Anet A8 Rafts: No Supports: Yes Resolution: .2mm Infill: 20% Notes: This print needs to print with the grill on the build plate. It should load this way automatically in your slicer. The supports are needed to support the large openings in the logo.