3D Arcade Stick
thingiverse
3D Arcade Stick is a 12 button arcade stick designed to support a Sanwa JLW Series Joystick and Sanwa OBSF-30 buttons. The top panel is 280mm x 180mm and the unit is just under 55mm in height when assembled. I’ve designed it so the joystick is mounted internally, with no screws visible in the top panel. Because of this, some hot glue is required at the base of the joystick mounting points to strengthen them. Make sure to cover from the base up to around 3-5mm past where the cylinder section starts. Also apply a little hot glue to the inside of the mounting tabs in the top panel as well. The back of the base unit has a 13mm hole to fit a PG7 cable gland. I used a Teensy 2.0 for the USB Interface. If you plan on using it, I have included an image with instructions on how to program it and wire it up. You can download my compiled code from: http://www.mediafire.com/file/aew42vg7ub1jcbc/3dArcadeStick.hex/file
With this file you will be able to print 3D Arcade Stick with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 3D Arcade Stick.