3D part scraping tool/ putty knife

thingiverse

This is a scraping - part lifting tool for lifting 3D printed parts off the hot bed. If sharpened properly works as utility knife too. Should be printed vertically with a 10 mm width brim or raft. Inserting part of the blade should be cut to dimensions using angle grinder (dimensions are shown in the third image). Then insert the blade into the handle and drill the holes through the blade. Fix the blade in the handle by using M3 nuts and bolts. You can make any shape of the blade using angle grinder, as long as you keep the inserting part of the blade to the dimensions in the third image. For my tool I used big 0,5 mm thickness stainless putty knife by cutting it with an angle grinder to the wanted shape.