3D print infill percentage disks (MakerWare profiles)
cults3d
A set of 3D print profiles for MakerBot Slicer in MakerWare. The purpose is to easily visualise how dense the following different infill percentages - No roof layer - 0% infill - No roof layer - 5% infill - No roof layer - 10% infill - No roof layer - 15% infill - No roof layer - 25% infill - No roof layer - 50% infill - No roof layer - 100% infill The 3D model is simply a scaled-up (3 mm) version of the built-in large helper disk in MakerWare. (http://www.makerbot.com/makerware) We attached the x3g print files which you can copy to an SD card and 3D print with PLA plastic on a MakerBot Replicator 2 3D printer. The ready-made 3D print profiles are adapted in MakerBot Slicer so that no roof is made. This leaves the top open and exposes the infill. To achieve a clear visualisation the model was made of two contrasting plastic colours.
With this file you will be able to print 3D print infill percentage disks (MakerWare profiles) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 3D print infill percentage disks (MakerWare profiles).