3D PRINT READY!! Mikasa from Attack On Titan

thingiverse

This print is ready to go and does not need any more fixing to be printed! Not the images are of v3, v4 has fixes for any issues i had with v3. 3D Print Ruby Rose here: https://www.thingiverse.com/thing:2357481 3D Print Weiss Schnee here: https://www.thingiverse.com/thing:2397963 Join the Anime Figure group and keep up to date with my models in progress and print anime figures! https://www.thingiverse.com/groups/animefigures Support me on Patreon! https://www.patreon.com/AnimuAnimu/posts This print already has all the support material ready to go, DO NOT add SUPPORT MATERIAL. the support material that i already added to the file has tapered ends and easily breaks off, however be very careful removing, especially around the head, swords, and hoses. I STRONGLY RECOMMEND USING A CUTTING DEVICE like a dremel, or rotary tool to cut the supports on this model. unlike my other models, this needs beefy supports for the crazy overhangs, but the model itself is very delicate. do not print this is if you are not willing to take the time to carefully remove the supports, and reprint if necessary. Print with AT LEAST 30% infill and be careful removing supports, there are many fragile features. DO NOT PRINT WITH A RAFT OR SUPPORT MATERIAL Do not freak out of the supports fail mid print, they are mostly redundant and designed to recover. there are TWO stl files included, PRINT THE 3DPrintReady FILE. I included files of the print without supports if you want to add your own supports. note a base is necessary or the model will tip over. print this at .1mm layer height for optimal results. i did a bunch of smoothing in Meshmixer, so the stl file is quite big even after being 'reduced' so be patient! Im working on making the whole RWBY gang, but my studies are sucking all my time and on top of that meshmixer keeps crashing so be patient! these things a pain to get printable