3D printed gimball RC stick - second upload
thingiverse
This is the gimball i made with T-flex and i printed it on 3D working fine. No springs in that simulation. Check the actual printed model here : https://www.youtube.com/watch?v=zzf8GmdlMfk Check the CAD video here : https://www.youtube.com/watch?v=QFAw2bznCdk&t=0s Screw are plastic screw 2.5mm diameter 8mm long. You need to find springs or make your own. Springs are made of 0.6mm diameter wire, 8 turns on 4mm bar. (new upload because of issues on youtube video) edit : added 3D pdf Printing: Ring - Infil to add weight, supports needed for spade inset. Letter embossing doesn't need it. Spade - Infil to add weight, no supports Letters - Print flat, already scaled to fit nicely in the embossing Star - Infil to add weight. Full print with 4x4x4 walls/top/bottom and 38% infil came to about 48g in weight. Glue in lettering and spade. Star may need minor sanding but should push fit into the space tightly and not need anything else to secure it.
With this file you will be able to print 3D printed gimball RC stick - second upload with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 3D printed gimball RC stick - second upload.