3D printer case with Lack tables (Ikea)

myminifactory

Here is parts to build a 3D printer case with Lack tables from Ikea. Edit: To regulate temperature within the case, you can use two 12V fan and a w1209 for example, that's what i will do. Here is a w1209 case i made too. ************************* All parts you need: 2 or 3 Lack table from Ikea 4 x acrylic glass (plexiglass) 4mm (0.157") thin 50cm x 44.5cm (19.68" x 17.52") Wood screws and hex screws Printed parts (BOM): 1 x Left front Link 1 x Right front Link 2 x Back links 2 x Top Back Links 1 x Top Left Front Link 1 x Top Right Front Link 2 x Hinge 1 x Door knob If you want to connect 3 tables together, you need 4 x L Shape more. Optionnally, if you want feets for the table on the ground, you can print 4 x Feet. ************************* Note: The L_shape.stl is to join the first table from floor and the second together. Rods of plastic are here to center the L without mesuring, cut them when you found their good place :)