3DLabPrint - Zero A6M2 fuse battery modification

cults3d

Full 3dLabPrints zero can be found here: https://3dlabprint.com/shop/a6m2zero/ This modification opens up the battery tray. The purchased fuse will fit everything, but it is a very tight squeeze for me. So I had modified the fuse for my needs so that I can fit things more easily and have access to get them out when I need. The white print is the original file. The green print is with the modded fuse pieces in this design. With this modification you will also need to use the servo mount (included) which will be glued to the wall. Best to print in PLA. The current fuse 1a-xbat-merge at full print requires at least a 235mm Z build volume. It would be up to you to use something like Prusa to split the file to print on a smaller bed. The reason why I split fuse 2 of the original file like I did was to minimize bridging during print. Since I remove most of the servo mount in Fuse2, I wanted to make sure the join didn't have any "wall" between the two pieces leaving the entire battery tray open. This currently does not carry the included guide to fit easily into each other between two pieces. However I have included glue-guide-tabs that you can print 4 of them which will help guide during glue joining. 3dLabPrints zero can be found here: https://3dlabprint.com/shop/a6m2zero/