3DR Solo Gimbal Adapter for Kodak SP360 Camera
thingiverse
The adapter will snap in to the gimbal followed by the SP360 camera adapter which is held in with the stock GP (Green) Clip. I added 14g counterweight to balance the SP360 in the gimbal. IMPORTANT NOTE! You must hold the Camera at the 90 degree (face forward) position while the Solo boots up so that the gimbal can calibrate. Then still holding the camera let it slowly pan down as you operate the paddle to zero degrees. If you fail to do this the gyros will time out rendering the gimbal limp. If this happens power the Solo down and reboot. Except for the counterweight there are no modifications to the Gimbal so it can easily be used with the GP camera. If you want to purchase this adapter go to soloflies.com
With this file you will be able to print 3DR Solo Gimbal Adapter for Kodak SP360 Camera with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 3DR Solo Gimbal Adapter for Kodak SP360 Camera.