40-Dart Drum Magazine for the Dart Zone ("Adventure Force" nerf) Villainator (V2)

thingiverse

UPDATE 9/1/2021: V2! - I've uploaded V2 with the **corrected rear post top disc diameter** and a **slight increase to the bottom ID of the dart wells** (+0.25mm; was 12.5mm, now 12.75mm). I also corrected a little weird geometry near the air ingress point at the base of the dart wells. Once I get the V2 print in my hands I'll re-test and post results. UPDATE 8/31/2021: V1 Printed and tested! - - Top disc of rear post is supposed to be 20mm, but I goofed and drew V1 at 22mm - The inner diameter of the dart wells were too snug at the bottom After sanding down the disc to 20mm the drum performs perfectly in testing, even with the darts *quite* snugly held by the dart wells. I've now shot 10+ full drums of darts through the V1 drum with only a handful of skips/misfires. In all of these cases I think the dart wells were simply grabbing the darts too tightly. Overall, I'm super happy with this design even as it is. UPDATE 8/18/2021: - - .stp file added ORIGINAL POST: - This is a from-scratch design for a 40 round drum that fits the Dart Zone Villainator, sold under the 'Adventure Force' line at Walmart. If you decide to give this a go please consider sending me a tip, and be sure to post feedback below. If you print this design, **please consider leaving me a tip**; and please let me know if you are interested in **licensing** this or any of my other designs for commercial uses/sale!