4x4 post hole center punch
thingiverse
NOTE: rotate the X axis 180 degrees to flip it over for easy print. a coworker wanted a tool to use for his upcoming fence project, he needed to be able to quickly locate the center of the top of a 4x4 post and mark it for drilling. a quick bit of google taught me that most posts are 3.5x3.5 but not always, so i made the center of this piece at 3.5x3.5 inches and the outer inside perimeter at 4x4 inches with a 1/2 inch hole int he center. hope it helps someone else. Print Settings Printer: Folgertech Kossel 2020 Rafts: No Supports: No Resolution: .4mm layer height Infill: 20% Notes: x axis 180 to put flat side on bottom. I printed in PLA 203 degrees 60mm/s Post-Printing
With this file you will be able to print 4x4 post hole center punch with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 4x4 post hole center punch.