5.25" Half Height Bay Gotek (w/ oled display, encoder...) Floppy Emulator Bracket with space for 3.5" disk drive

thingiverse

"Bracket to fit a Gotek emulator drive as well as a 3.5" floppy drive in the same 5.25" (half height) drive bay. " (Tom_DD) You can use a screen OLED, 128x32, and a rotary encoder, like photo. The green LED , you will need to remont, using wire, soldering etc. same to rotate board, that you will need to put it (board) in a “table” space, behind the front panel rotate local… This version have 2 pendrive (micro SDisk) holder in front (to easy change). In back front panel, you have a buzzer holder tool (you will recognize the space) "It is a very tight fit with the large capacitor on the Gotek just touching the bottom of the 3.5" drive. You may require some insulating tape for this depending on your drive case. Luckily some Goteks have this capacitor laying down so it is not an issue." (Tom_DD) I used a new capacitor, so, I can put down to dont touch the floppy. (but the tape is a good solution, if the capacitor arent so big). * Sorry my poor english.