5.25" to 3.5" brackets with captive nuts
thingiverse
I found the two case mounting screw holes were 7mm too high so I recreated it from scratch using the original as a template and added captive M3 nuts to ease assembly and prevent metal parts coming loose inside the computer. I also have 3.5" to 2x and 3x 2.5" brackets in a similar design. The nuts can be pushed in with a pair of pliers and pushed out with a fine pair of tweezers using the bolt holes. The 3.5" drive standoffs requre M3x25 countersunk screws. I printed using Cura 4.9 with eSun PLA on an Ender 3 with 0.4mm nozzle, 0.3mm line width, 0.16 layer height, 100% infill, 210C nozzle, 50C glass buildplate, 10mm brim, 40mm/s top/bottom/walls, 40% fan speed at 5mm, with 6mm retraction at 45mm/s, no support.
With this file you will be able to print 5.25" to 3.5" brackets with captive nuts with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 5.25" to 3.5" brackets with captive nuts.