6.5mm rope splicing fid
prusaprinters
<p>A fid intended for splicing 3/16 - 1/4" (4.7 - 6.3mm) synthetic winch cable. Buttress supports are included for a vertical print orientation. No additional supports are needed. Overall length is about 140mm. The fid is hollow for approximately 100mm. The internal volume terminates in a cone shape similar to the exterior.</p><p>Printing with a wide brim is suggested for better stability. I specified 4 walls & 49% infill. Post processing should include trimming off the buttress supports, filing or sanding off the nubs and overall sanding for a smooth finish.</p><p>A 5mm hex driver makes a good support for sanding.</p><p> </p>
With this file you will be able to print 6.5mm rope splicing fid with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 6.5mm rope splicing fid.