6mm Bit Driver for Victorinox 111mm SAK

prusaprinters

<h3>Introduction</h3> <p>This is a 6mm (1/4 inch) hex-bit driver I made for my 111mm Victorinox SAK. It will only work with 111mm Victorinox knives, but I will make one for 91mm ones as well once mine arrives.</p> <p>I tried to make it as durable and universal as possible, and it can be used for both light- and mid-duty tasks without problems. It can be printed both vertically and horizontally, with horizontal (the default position) being the more durable one according to my tests.</p> <p>Feel free to modify it as long as you credit me, as the item is under "Creative Commons - Attribution".</p> <p>I did my research into the smallest footprint possible while still being durable, and this is what I was able to make based on that.</p> <p>It fits on the flat-head/prybar/cap-lifter tool of the SAK. It's also made to lock-in into the tool (with a neat click sound!) for more versatility and less accidental discharges.</p> <h3>The different versions</h3> <ul> <li>111mm liner-lock (This one) - made for the liner-lock screwdriver/prybar/cap-lifter of the 111mm SAKs. The most durable and versatile one because of that. I don't have a non-liner-lock (older) version of the 111mm available, so this is only for the newer liner-lock ones.</li> <li>91mm - Not done yet, will update this page when it's finished</li> </ul> <p>To check what kind of screwdriver/prybar/cap-lifter you have, check this page: <a href="https://www.sakwiki.com/tiki-index.php?page=Cap+Lifter">https://www.sakwiki.com/tiki-index.php?page=Cap+Lifter</a></p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Creality</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 5</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Resolution:</strong></p> <p>0.12</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>85-100%</p></div> <p><strong>Filament:</strong> Creality PLA/ABS Black</p> <p><br/> <p class="detail-setting notes"><strong>Notes: </strong></p> </p><div><p>Only works on 0.12 resolution if printed horizontally due to the bit-driver slot needing the higher resolution to be printed. If you want to print on lower resolutions, (like 0.2, 0.28, etc.) you need to print it vertically.</p></div> Post-Printing ============= <p>After printing you can install a magnet in the 6mm (1/4 inch) hex slot if you'd like, but it's not required and still provides a snug fit without it.</p> </p></p></p> Category: Hand Tools