6mm OD PTFE Teflon Filament Tube Coupler / Joiner
thingiverse
This is a 6mm OD PTFE/Teflon filament tube coupler / joiner I designed that does just that - joins two pieces of 6mm OD filament tube together. The filament tubes press fit into the coupler and should fit quite snug without deformation. The tubes insert ~12-14mm into each side for a good fit. Angled/curved filament couplers I made can be found here - http://www.thingiverse.com/thing:1536208. Print Settings Printer: QIDI Tech Rafts: No Supports: Doesn't Matter Resolution: 0.12 Infill: 30% Notes: No support required but if used put on the inside to hold the middle section up. Printed in ABS with 3 shell layers, 7 top and bottom layers. My infill for these parts was 30% and layer height 0.12mm, feel free to change them to your desired amounts.
With this file you will be able to print 6mm OD PTFE Teflon Filament Tube Coupler / Joiner with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 6mm OD PTFE Teflon Filament Tube Coupler / Joiner.