6th Gen iPad Holder for Delonghi Eletta Coffee Machine (ECAM45760W)

prusaprinters

<p>Well, this might be the dumbest (but most useful) print I've ever designed.</p> <p>Long story short, I wanted a 6th Gen iPad in my kitchen to display my Home Assistant Dashboard.</p> <p>Decided I didn't want to put any holes in my wall, nor did I (or the wife) want the iPad sitting on the countertop.</p> <p>My coffee machine - the Delonghi Eletta (ECAM45760W) - just so happens to have two (security) screws (you'll need a security bit set) holding the back of the case together</p> <p>Lucky for us, the screws have space around them, allowing us to use these existing screws to fasten this iPad holder to the back of the coffee machine.</p> <p>Everything fits very snug with no wobbling, I am pretty happy.</p> <ol> <li>Designed to reduce the amount of filament used, with most thinner walls at 2.4mm to reduce infill use.</li> <li>Print the "Arm" file twice, flat side down.</li> <li>Print both "holder" files standing up (ie, curved edges at the top)</li> <li>No supports required.</li> <li>Print at 40% infill for extra rigidity (probably could use less).</li> <li>Tested with PLA and PETG at 0.3mm and 0.2mm (1.75mm nozzle) on a Prusa MK3S+. Print time is 2h51m at 0.3mm.</li> <li>If you print at higher quality (lower layer height), the top of the curved sections will be nicer.</li> <li>No glue required between the holders and the arms.</li> </ol> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Prusa</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>I3 MK3S</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Resolution:</strong></p> <p>0.3mm</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>20-40%</p></div> <p><strong>Filament:</strong> Prusament PETG</p> </p></p></p> Category: Kitchen & Dining