7 inch Display Panel Duet 2 WiFi

thingiverse

Having tried to print one of the available designs for the 7 inch panel that shipped from Duet3D i noticed the display must have changed at some point as my panel did not fit so I made this very simple version. There will be updates as I finish each part, for the moment I have only uploaded the bit that the panel sits in, the back panel is not yet finished in design as I haven't figured out the mounting arrangements I want to use yet and will complete the design once I have rebuilt the printer with the Duet 2 Wifi controller in. I have used small pieces of foam under the mounting screws which are M3. Shouldn't need to tap these as they are fixed for the M3 screws, the holes are 4 mm deep, so length of screw is about 6mm. I also drew it the wrong way around so you will have to orient it 180 degrees in either X or Y axis for it to print properly, sorry about that :-) 31/01/19 I have added the cables and it seems the enclosure needs to be about 2mm deeper, so will update that, also need to add a slot for the SD card. 11/02/19 I have updated the Panel mount so that it is a couple of mm deeper as it was borderline touching the cables. Still to add the SD card slot in the panel. I have also added the lid, although no mounts at this time for it to attach to the 20x20 aluminium extrusion. That and the update for the SD card slot will come next.