7" Raspberry Pi 3 Display Holder for Felix Pro with PI 3B+ & Pollin LS7-T ouch Display

thingiverse

This is a Remix of https://www.thingiverse.com/thing:1614568 and https://www.thingiverse.com/thing:298272 Im use the Repetier Server I Use this Touch https://www.pollin.de/p/7-17-78-cm-display-set-mit-touchscreen-ls-7t-hdmi-dvi-vga-cvbs-120964 with a Raspberry Pi 3 B + One Stepp Down Module ( The Display Works only 9...18 V / in my case 12Volt 3 Amp the Raspberry Pi need 5.1 Volt) This Cabel https://www.berrybase.de/audio-video/adapter-adapterkabel/hdmi/hdmi-diy-flachbandkabel-spezifische-konfiguration?c=336 The Cable is under the Raspberry see the Saving out Cut fix the Ribbon Cabel with a Tape Switch for Power Off Display and Raspberry And One 433MHZ Module for Powering the Printer over Radio socket ( No need) TO Mount for Raspberry https://www.amazon.de/Abstandsbolzen-männlich-weiblich-weiblich-weiblich-Abstandshalter-Distanzhülse/dp/B07MKNSJMF/ref=pd_sbs_60_10?_encoding=UTF8&pd_rd_i=B07MKNSJMF&pd_rd_r=4663d560-8a82-11e9-ae29-db84bbde0fca&pd_rd_w=wt4Hl&pd_rd_wg=6MBNf&pf_rd_p=74d946ea-18de-4443-bed6-d8837f922070&pf_rd_r=7XK5MKSDSFC7SP350MS1&psc=1&refRID=7XK5MKSDSFC7SP350MS1 Need 15 mm For The Backcover Holder https://www.amazon.de/HSeaMall-Innengewinde-Rändelmuttern-Spritzguss-Gewindeeinsatz/dp/B07CPRHP2X/ref=sr_1_3?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&keywords=gewindeeins%C3%A4tze&qid=1560062860&s=gateway&sr=8-3 see Picture Coolig Pad For Raspberry https://www.amazon.de/GeeekPi-Raspberry-Kühlkörper-Wärmeleitkleber-Klebeband/dp/B07CCN49FZ/ref=sr_1_25?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&keywords=raspberry+k%C3%BChler&qid=1560063022&s=gateway&sr=8-25 You still have to drill holes in the case behind display housing with the holders after printing and one hole up for the display power cable after Needs. I did it with a drill. Otherwise, everything above fits is a saving for the switch. Cable I have shortened so far My Pi 3b + has a temperature of 60 degrees is in the frame however with a good cooler set that with the messing cooler. The holder is a REMIX and we do not have me attached to the front but at the back. Since it slayed me a bit up front. I also fixed the holder with a little double-sided tape. Because the construction is not exactly light. It keeps with me flawless you have everything together You still need to pens to a long and then in half. Attachment for the housing.