7mm 2.5" HDD/SSD Mount for PCEngines APU2
thingiverse
# 7mm 2.5" HDD/SSD Mount for PCEngines APU2 Used in combination with PCEngines case1d2 and apu3c4, though any APU board should work. To connect the hard disk to the board, you can use the satacab1, but I do recommend to get a short SATA extension cable to put in between, as the satacab1 is quite short and rather rigid, so you may end up putting some stress on the cable and the printed parts. Note that due to the limited space inside the case1d2, this thing will only work with 7mm drives, the more common 9.5mm drives most likely won't fit (or if they do, only under stress to the case, the printed parts and the APU board). ## License Copyright (C) 2020 s3lph This thing is licensed under the terms of CC BY-SA 4.0 https://creativecommons.org/licenses/by-sa/4.0/
With this file you will be able to print 7mm 2.5" HDD/SSD Mount for PCEngines APU2 with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 7mm 2.5" HDD/SSD Mount for PCEngines APU2.