7mm SSD case for StarTech SATA to USB adapter

thingiverse

7mm SSD case for StarTech SATA to USB adapter Converts a laptop 7mm SSD and SATA to USB adapter into a portable, external media device! Works well for media, clumsy folks who don't want to break a hard drive, and portable Linux installations. Requirements 7mm SSD. Any drive should work, but I used a SanDisk Plus SSD. This SATA to USB adapter: http://www.amazon.com/StarTech-SATA-Drive-Adapter-Cable/dp/B00HJZJI84 A 3D Printer Time Features: Pre rendered standard SSD sizes 120GB 128GB 240GB 256GB 480GB 512GB and a text-less version. Clip so the SSD does not fall out the bottom Finger cut out for easy accessibility Sturdy, 4 perimeter design. And a hole for the access indicator! Post-Printing Notes Simply remove extra bits and strands of filiment. If the SSD is too loose, surround the SSD with some paper. This will not only protect the SSD from the scratchy plastic, but also provide a nice snug fit inside the case. SSD Installation steps Connect the SSD to the adapter. Slide the USB cable end through the case Pull the USB cable through the case Align the SSD (optional: surrounded with paper) so it fits in the hole Push the SSD through the large hole until it hits the other end of the case Attach the clip (if needed) to the bottom of the case How I Designed This Inventor 2016 Pro You can download the *.ipt (source) and modify the text and/or dimensions of the model.