88mm Brushed Toothpick Frame

thingiverse

This is a toothpick quad with 8.5mm motors and 55mm props. Its made to house a whoop sized FC (26 x 26mm). The battery holder needs to be mounted with the opening towards the back so you can access the USB port. I installed a Beecore V2.0 and an fx805 camera VTX combo that I had lying around. I made my own connector out of balance plugs but they only have 2 pins (solid pins) which result in less voltage sag. I have included a picture of the size difference between a ph2.0 connector and mine. Since 3d printing has its limitations printing columns that are hollow is very difficult, the Beecore needs to be mounted with double-sided sticky tape on the square bit in the middle of the frame and the camera screwed down on top of that. I am using a 600 mAh battery with my custom plug mod to get around 3:30 - 4:00 min of flight time with plenty of power. I'm thinking of making a mount adapter for tiny whoop batteries (250 mah) and putting 2 of them in parallel, so let me know if you would like that! Parts: Beecore V2.0: https://tinyurl.com/rvy9lbq FX805 Camera/VTX: https://tinyurl.com/vjxmsce Props: https://tinyurl.com/u7ptb9f 8.5mm Motors: https://tinyurl.com/sgrpe6a Battery Connector Plugs Found In This Kit: https://tinyurl.com/qw2mcjd Battery: https://tinyurl.com/vtwbokb 3/18/2020: Added adapter for whoop batteries and added step files for everything. Also added an assembly (.iam) of the quad from Inventor 2019 (might not be compatible with earlier versions, 2018, 2017, etc)