A Hat in Time sticker cookie cutters
Your favorite stickers, now in edible form! (Disclaimer: edibility depends on your baking skill) The cookies are approximately 8cm across/high at 100% size Note: This project is still WIP, and more stickers will be ported for the oven in the future Printing instructions ================ 1. Download both the cutter (has cutter in the name) and stamp files (just the name) of the sticker 1a. Optional: Download the handle file as well 2. Print the cutter and stamp at 100% size, make them larger if your slicer is unable to resolve the lines properly. Print the handle during this stage if you want. Protip: make sure your bed adhesion is good for this print. Any warping will make things very difficult. 2a. Glue the handle to the back of the stamp if you printed it out 3. Roll out your cookie dough of choice to about 5mm. I recommend a sugar cookie recipe which has low expansion for the best results. 4. Use the cutter to cut the dough, apply even and firm pressure all around. 5. Press down the stamp onto the blank cookie. Again, even and firm pressure all around (especially the corners). 6. Bake as directed by your cookie recipie. You will likely achieve better results by chilling the cookies prior to baking to help them keep their shape. 7. Enjoy
With this file you will be able to print A Hat in Time sticker cookie cutters with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on A Hat in Time sticker cookie cutters.